參數資料
型號: JANTXV2N5796U
英文描述: TRANSISTOR | BJT | PAIR | PNP | 40V V(BR)CEO | 600MA I(C) | SMT
中文描述: 晶體管|晶體管|一對|進步黨| 40V的五(巴西)總裁| 600毫安一(c)|貼片
文件頁數: 20/21頁
文件大?。?/td> 137K
代理商: JANTXV2N5796U
MIL-PRF-19500/368F
8
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this document and
MIL-PRF-19500.
3.2 Qualification. Devices furnished under this specification shall be products that are manufactured by a
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturer's list (QML)
before contract award (see 4.2 and 6.3).
3.3 Abbreviations, symbols, and definitions. Abbreviations, symbols, and definitions used herein shall be as
specified in MIL-PRF-19500.
* 3.4 Interface and physical dimensions. The interface and physical dimensions shall be as specified in
MIL-PRF-19500, MIL-HDBK-6100 and on figure 1 (similar to TO- 5 and TO-39), figure 2 (JANHCA and JANKCA, (A
versions)), figure 3 (JANHCB and JANKCB (B versions)), and figure 4 (2N3439UA and 2N3440UA surface mount
versions).
3.4.1 Lead finish. Lead finish shall be solderable in accordance with MIL-PRF-19500, MIL-STD-750, and herein.
Where a choice of lead finish is desired, it shall be specified in the acquisition document (see 6.2).
3.5 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance
characteristics are as specified in 1.3, 1.4, and table I herein.
3.6 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table I herein.
3.7 Marking. Marking shall be in accordance with MIL-PRF-19500. At the option of the manufacturer, marking
may be omitted from the body, but shall be retained on the initial container.
3.8 Workmanship. Semiconductor devices shall be processed in such a manner as to be uniform in quality and
shall be free from other defects that will affect life, serviceability, or appearance.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
Qualification inspection (see 4.2).
b.
Screening (see 4.3).
c.
Conformance inspection (see 4.4).
4.2 Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-19500 and table II
herein.
* 4.2.1 Group E qualification. Group E inspection shall be performed for qualification or re-qualification only. In
case qualification was awarded to a prior revision of the associated specification that did not request the
performance of table II tests, the tests specified in table II herein shall be performed by the next inspection lot to this
revision to maintain qualification.
相關PDF資料
PDF描述
JANTXV2N6032 TRANSISTOR | BJT | NPN | 90V V(BR)CEO | 50A I(C) | TO-3
JANTXV2N6033 TRANSISTOR | BJT | NPN | 120V V(BR)CEO | 40A I(C) | TO-3
JANTXV2N6051 TRANSISTOR | BJT | DARLINGTON | PNP | 80V V(BR)CEO | 12A I(C) | TO-3
JANTXV2N6052 TRANSISTOR | BJT | DARLINGTON | PNP | 100V V(BR)CEO | 12A I(C) | TO-3
JANTXV2N6193 TRANSISTOR | BJT | PNP | 100V V(BR)CEO | 5A I(C) | TO-39
相關代理商/技術參數
參數描述
JANTXV2N6032 制造商:Microsemi Corporation 功能描述:Trans GP BJT NPN 90V 50A 3-Pin(2+Tab) TO-3 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 90V 50A 3PIN TO-3 - Bulk
JANTXV2N6033 制造商:Microsemi Corporation 功能描述:Trans GP BJT NPN 120V 40A 3-Pin(2+Tab) TO-3 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 120V 40A 3PIN TO-3 - Bulk
JANTXV2N6051 制造商:Microsemi Corporation 功能描述:Trans Darlington PNP 80V 12A 3-Pin(2+Tab) TO-3 制造商:Microsemi Corporation 功能描述:TRANS DARLINGTON PNP 80V 12A 2PIN TO-3 - Bulk
JANTXV2N6052 制造商:Microsemi Corporation 功能描述:Trans Darlington PNP 100V 12A 3-Pin(2+Tab) TO-3 制造商:Microsemi Corporation 功能描述:TRANS DARLINGTON PNP 100V 12A 2PIN TO-3 - Bulk
JANTXV2N6058 制造商:Aeroflex / Metelics 功能描述:NPN POWER TRANSISTOR - Bulk 制造商:Microsemi Corporation 功能描述:TRANS DARLINGTON NPN 80V 12A 3PIN TO-3 - Bulk