- 您現在的位置：買賣IC網 > PDF目錄353811 > JANTXV2N6988 TRANSISTOR | BJT | ARRAY | INDEPENDENT | 60V V(BR)CEO | 600MA I(C) | FP PDF資料下載
參數資料
| 型號： | JANTXV2N6988 |
| 英文描述： | TRANSISTOR | BJT | ARRAY | INDEPENDENT | 60V V(BR)CEO | 600MA I(C) | FP |
| 中文描述： | 晶體管|晶體管|陣|獨立| 60V的五（巴西）總裁| 600毫安一（c）|計劃生育 |
| 文件頁數： | 2/19頁 |
| 文件大小： | 103K |
| 代理商： | JANTXV2N6988 |
MIL-PRF-19500/512E
10
4.3.2 Thermal impedance (ZθJX measurements). The ZθJX measurements shall be performed in accordance with
method 3131 of MIL-STD-750.
a.
IM measurement current ...................... 5 mA.
b.
IH forward heating current ................... 200 mA (min).
c.
tH heating time..................................... 25 - 30 ms.
d.
tmd measurement delay time .............. 60 s max.
e.
VCE collector-emitter voltage .............. 10 V dc minimum( same as VH ).
f.
VH collector-emitter heating voltage ... 10 V ( minimum ).
g.
tSW sample window time .................... 10 s ( maximum ).
The maximum limit for ZθJX under these test conditions are ZθJX (max) = 60°C/W. (UA and UB); 67°C/W (2N4029
and 2N4033).
4.3.3 Screening (JANHC and JANKC). Screening of JANHC and JANKC die shall be in accordance with
MIL-PRF-19500, "Discrete Semiconductor Die/Chip Lot Acceptance". Burn-in duration for the JANKC level follows
JANS requirements; the JANHC follows JANTX requirements.
4.4 Conformance inspection. Conformance inspection shall be in accordance with MIL-PRF-19500 and as
specified herein.
4.4.1
Group A inspection. Group A inspection shall be conducted in accordance with appendix E, table V of
MIL-PRF-19500 and table I herein.
4.4.2 Group B inspection. Group B inspection shall be conducted in accordance with the tests and conditions
specified for subgroup testing in table VIa (JANS) of MIL-PRF-19500 and 4.4.2.1 herein. Electrical measurements
(end-points) and delta requirements shall be in accordance with group A, subgroup 2 and 4.5.2 herein: delta
requirements only apply to subgroups B4, and B5. See 4.4.2.2 for JAN, JANTX, and JANTXV group B testing.
Electrical measurements (end-points) and delta requirements for JAN, JANTX, and JANTXV shall be after each step
in 4.4.2.2 and shall be in accordance with group A, subgroup 2 and 4.5.2 herein.
4.4.2.1 Group B inspection, table VIa (JANS) of MIL-PRF-19500.
Subgroup
Method
Condition
B4
1037
VCB = 10 V dc.
B5
1027
VCB = 10 – 20 V dc; PD ≥ 75 percent of maximum rated PT (see 1.3). Option 1:
96 hours min, sample size in accordance with table VIa of MIL-PRF-19500,
adjust TA to achieve TJ = +275°C minimum. Option 2: 216 hours., sample size
= 45, c = 0; adjust TA to achieve TJ = +225°C minimum.
相關PDF資料 |
PDF描述 |
|---|---|
| JANTXV2N6989 | TRANSISTOR | BJT | ARRAY | INDEPENDENT | 50V V(BR)CEO | 800MA I(C) | TO-116 |
| JANTXV2N6989U | TRANSISTOR | BJT | ARRAY | INDEPENDENT | 50V V(BR)CEO | 800MA I(C) | TO-116 |
| JANTXV2N6990 | TRANSISTOR | BJT | ARRAY | INDEPENDENT | 50V V(BR)CEO | 800MA I(C) | FP |
| JANTXV2N6990U | BJT |
| JANTXV2N720A | TRANSISTOR | BJT | NPN | 80V V(BR)CEO | TO-18 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| Jantxv2N6989 | 制造商:Microsemi Corporation 功能描述:NPN QUAD TRANSISTOR (NPNQ) - Bulk 制造商:Microsemi Corporation 功能描述:TRANS NPN QUAD 50V 800MA TO116 |
| JANTXV2N6989U | 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 50V 0.8A 20LLCC - Bulk |
| JANTXV2N6990 | 制造商:Microsemi Corporation 功能描述:NPN QUAD TRANSISTOR (NPNQ) - Bulk 制造商:Microsemi Corporation 功能描述:TRANS NPN QUAD 50V 800MA 14PIN |
| JANTXV2N718A | 制造商:Microsemi Corporation 功能描述:Trans GP BJT NPN 30V 0.5A 3-Pin TO-18 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 30V 0.5A 3PIN TO-18 - Bulk |
| JANTXV2N720A | 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Bulk |
發(fā)布緊急采購，3分鐘左右您將得到回復。