參數資料
型號: JANTXV2N6990U
英文描述: BJT
中文描述: 雙極型晶體管
文件頁數: 3/19頁
文件大?。?/td> 103K
代理商: JANTXV2N6990U
MIL-PRF-19500/512E
11
4.4.2.2 Group B inspection, (JAN, JANTX and JANTXV). Separate samples may be used for each step. In the
event of a group B failure, the manufacturer may pull a new sample at double size from either the failed assembly lot
or from another assembly lot from the same wafer lot. If the new “assembly lot” option is exercised, the failed
assembly lot shall be scrapped.
Step
Method
Condition
1
1039
Steady-state life: Test condition B, 340 hours, VCB = 10 - 20 V dc, power shall
be applied to the device to achieve TJ = +150°C minimum, and a minimum of PD
= 75 percent of maximum rated PT as defined in 1.3 herein. n = 45, c = 0.
2
1039
The steady-state life test of step 1 shall be extended to 1,000 hours for each die
design. Samples shall be selected from a wafer lot every twelve months of wafer
production. Group B, step 2 shall not be required more than once for any single
wafer lot. n = 45, c = 0.
3
1032
High- temperature life (non-operating), T
A = +200°C, t = 340 hours, n = 22,
c = 0.
4.4.2.3 Group B sample selection. Samples selected from group B inspection shall meet all of the following
requirements:
a.
For JAN, JANTX, and JANTXV samples shall be selected randomly from a minimum of three wafers (or
from each wafer in the lot) from each wafer lot. For JANS, samples shall be selected from each inspection
lot. See MIL-PRF-19500.
b.
Must be chosen from an inspection lot that has been submitted to and passed group A, subgroup 2,
conformance inspection. When the final lead finish is solder or any plating prone to oxidation at high
temperature, the samples for life test (subgroups B4 and B5 for JANS, and group B for JAN, JANTX, and
JANTXV) may be pulled prior to the application of final lead finish.
4.4.3 Group C inspection. Group C inspection shall be conducted in accordance with the tests and conditions
specified for subgroup testing in table VII of MIL-PRF-19500, and in 4.4.3.1 (JANS) and 4.4.3.2 (JAN, JANTX, and
JANTXV) herein for group C testing. Electrical measurements (end-points) and delta requirements shall be in
accordance with group A, subgroup 2 and 4.5.2 herein; delta requirements only apply to subgroup C6.
4.4.3.1 Group C inspection, table VII (JANS) of MIL-PRF-19500.
Subgroup
Method
Condition
C2
2036
Test condition E; (method 2036 not applicable for UA and UB devices).
C6
1026
1,000 hours at VCB = 10 V dc; power shall be applied to achieve TJ = +150°C
minimum and a minimum of PD = 75 percent of maximum rated PT as defined in
1.3.
4.4.3.2 Group C inspection, table VII (JAN, JANTX, and JANTXV) of MIL-PRF-19500.
Subgroup
Method
Condition
C2
2036
Test condition E; not applicable for UA and UB devices.
C6
Not applicable.
相關PDF資料
PDF描述
JANTXV2N720A TRANSISTOR | BJT | NPN | 80V V(BR)CEO | TO-18
JANTXV2N7218U TRANSISTOR | JFET | N-CHANNEL | 100V V(BR)DSS | 25UA I(DSS)
JANTXV2N7219U TRANSISTOR | JFET | N-CHANNEL | 200V V(BR)DSS | 25UA I(DSS)
JANTXV2N7221 400V Single N-Channel Hi-Rel MOSFET in a TO-254AA package
JANTXV2N7221U TRANSISTOR | JFET | N-CHANNEL | 400V V(BR)DSS | 25UA I(DSS)
相關代理商/技術參數
參數描述
JANTXV2N718A 制造商:Microsemi Corporation 功能描述:Trans GP BJT NPN 30V 0.5A 3-Pin TO-18 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 30V 0.5A 3PIN TO-18 - Bulk
JANTXV2N720A 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Bulk
JANTXV2N7218 制造商:International Rectifier 功能描述:Trans MOSFET N-CH 100V 28A 3-Pin(3+Tab) TO-254AA 制造商:International Rectifier 功能描述:TRANS MOSFET N-CH 100V 28A 3PIN TO-254AA - Bulk
JANTXV2N7218U 制造商:International Rectifier 功能描述:TRANS MOSFET N-CH 100V 28A 3SMD-1 - Bulk
JANTXV2N7219 制造商:International Rectifier 功能描述:Trans MOSFET N-CH 200V 18A 3-Pin(3+Tab) TO-254AA 制造商:International Rectifier 功能描述:TRANS MOSFET N-CH 200V 18A 3PIN TO-254AA - Bulk 制造商:International Rectifier 功能描述:200V SINGLE N-CH HI-REL MOSFET TO-254AA