參數資料
型號： JANTXV
廠商： Microsemi Corporation
英文描述： DIODE ARRAY PRODUCT SPECIFICATION
中文描述： 二極管陣列產品規格
文件頁數： 20/21頁
文件大小： 137K
代理商： JANTXV
MIL-PRF-19500/368F
8
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this document and
MIL-PRF-19500.
3.2 Qualification. Devices furnished under this specification shall be products that are manufactured by a
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturer's list (QML)
before contract award (see 4.2 and 6.3).
3.3 Abbreviations, symbols, and definitions. Abbreviations, symbols, and definitions used herein shall be as
specified in MIL-PRF-19500.
* 3.4 Interface and physical dimensions. The interface and physical dimensions shall be as specified in
MIL-PRF-19500, MIL-HDBK-6100 and on figure 1 (similar to TO- 5 and TO-39), figure 2 (JANHCA and JANKCA, (A
versions)), figure 3 (JANHCB and JANKCB (B versions)), and figure 4 (2N3439UA and 2N3440UA surface mount
versions).
3.4.1 Lead finish. Lead finish shall be solderable in accordance with MIL-PRF-19500, MIL-STD-750, and herein.
Where a choice of lead finish is desired, it shall be specified in the acquisition document (see 6.2).
3.5 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance
characteristics are as specified in 1.3, 1.4, and table I herein.
3.6 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table I herein.
3.7 Marking. Marking shall be in accordance with MIL-PRF-19500. At the option of the manufacturer, marking
may be omitted from the body, but shall be retained on the initial container.
3.8 Workmanship. Semiconductor devices shall be processed in such a manner as to be uniform in quality and
shall be free from other defects that will affect life, serviceability, or appearance.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
Qualification inspection (see 4.2).
b.
Screening (see 4.3).
c.
Conformance inspection (see 4.4).
4.2 Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-19500 and table II
herein.
* 4.2.1 Group E qualification. Group E inspection shall be performed for qualification or re-qualification only. In
case qualification was awarded to a prior revision of the associated specification that did not request the
performance of table II tests, the tests specified in table II herein shall be performed by the next inspection lot to this
revision to maintain qualification.
相關PDF資料
PDF描述
JANTX1N5415 Coiled Cord; Features:6' positive coil memory combats cord stretch out; date coded for traceability; stainless steel spinning style banana plug reduces cord tangles; For Use With:WBB-AFWS Adjustable Fabric Wrist Strap RoHS Compliant: NA
JANTX1N5416 CORD, COILED, 10MM STUD-4MM SKT, 2M; Length, lead:2m RoHS Compliant: NA
JANTX1N5417 CORD, COILED, 10MM STUD-STUD, 2M; Length, lead:2m RoHS Compliant: NA
JANTX1N5418 Personal protection, Sorbents RoHS Compliant: NA
JANTX1N5419 GROUND CORD, 2X4MM SOCKETS, 5M; Length, lead:15ft RoHS Compliant: NA
相關代理商/技術參數
參數描述
JANTXV16SYQ030C 制造商:International Rectifier 功能描述:JANTXV16SYQ030C - Bulk
JANTXV16YQ100C 制造商:International Rectifier 功能描述:JANTXV16YQ100C - Bulk
JANTXV1N1184 制造商:Microsemi Corporation 功能描述:STD RECOVERY RECTFR 100V 40A 2PIN DO-203AB - Bulk
JANTXV1N1184R 制造商:Microsemi Corporation 功能描述:STD RECOVERY RECTFR 100V 40A 2PIN DO-203AB - Bulk
JANTXV1N1186 制造商:Microsemi Corporation 功能描述:STD RECOVERY RECTFR 200V 40A 2PIN DO-203AB - Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*