<small id="mjv6d"><small id="mjv6d"></small></small>
  • <rt id="mjv6d"><delect id="mjv6d"><small id="mjv6d"></small></delect></rt>
    <rt id="mjv6d"><delect id="mjv6d"><noframes id="mjv6d"><li id="mjv6d"><input id="mjv6d"></input></li>
    <li id="mjv6d"><dl id="mjv6d"><div id="mjv6d"></div></dl></li><li id="mjv6d"><pre id="mjv6d"><div id="mjv6d"></div></pre></li>
  • <rt id="mjv6d"></rt>
  • 參數資料
    型號: JCUFLMET-170.000MHZ
    英文描述: Voltage-Controlled Oscillator
    中文描述: 壓控振蕩器
    文件頁數: 4/8頁
    文件大?。?/td> 113K
    代理商: JCUFLMET-170.000MHZ
    Vectron International 166 Glover Avenue, Norwalk, CT 06856 Tel: 1-88-VECTRON-1 Fax: 1-888-FAX-VECTRON
    4
    J-Type Voltage Controlled Crystal Oscillator
    1
    Vc
    VCXO Control Voltage.
    2
    N/C or E/D1
    No Connect or Output Disable option
    3
    GND
    Case and electrical ground.
    4
    Output
    VCXO Output
    5COutput
    VCXO Complementary Output
    6VCC
    Power Supply Voltage (5.0 V or 3.3V ±10%)
    Pin Out Information for the PECL output option
    Electrical Performance @ 25°C for the PECL output option
    PECL Output Option
    1. By setting pin 2 high, the outputs are disabled and output on pin 4 is held low while Complementary output on pin 5 is held high.
    Output is enabled by setting pin 2 at < Vcc -1.6V, See ordering information for enable/disable option.
    Supply Voltage1, +5 volt option
    4.5
    5.0
    5.5
    Vdc
    +3.3 volt option
    3.0
    3.3
    3.6
    Vdc
    Supply Current (frequency dependent)
    <65mA
    Center Frequency, see ordering information
    FN
    15
    170
    MHz
    Operating Temperature, see ordering info
    TOP
    0/70, -40/85
    °C
    Absolute Pull Range over the operating tempera-
    APR
    ±32 to ±50
    ppm
    ture range, aging and power supply Vc= 0.5 to
    4.5 at 5V supply or 0.3 to 3.0 V at 3.3 supply
    see ordering information for options
    Gain Transfer
    KV
    Positive
    (Frequency vs. Control Voltage)
    Output Level High2 (0/70°C)
    VOH
    Vcc-1.025
    -
    Vcc-0.880
    V
    Output Level Low2 (0/70°C)
    VOL
    Vcc-1.810
    -
    Vcc-1.620
    V
    Output Level High2 (-40/+85°C)
    VOH
    Vcc-1.085
    -
    Vcc-0.880
    V
    Output Level Low2 (-40/+85°C)
    VOL
    Vcc-1.830
    -
    Vcc-1.555
    V
    Output Rise/Fall Time2
    tR/ tF
    1ns
    Duty Cycle
    SYM
    45/55
    %
    Control Input Leakage
    IL
    0.1
    mA
    Control Voltage Modulation Bandwidth
    BW
    10
    kHz
    RMS Jitter
    see ordering information
    ps
    RMS Jitter, 155.52 MHz, 12 kHz to 20 MHz (option P)
    0.5
    1.0
    ps
    Maximum Control Voltage
    0
    VDD
    Maximum Supply Voltage
    7V
    Storage Temperature
    TS
    -55
    -
    125
    °C
    Soldering Temp./Time
    TLS
    -
    220/10
    °C/s
    Parameter
    Symbol
    Minimum
    Typical
    Maximum
    Unit
    1. Power supply bypass is required and a 0.1uF in parallel with a 0.01uF high frequency capacitor is recommended.
    2. Transition times are measured from 20% to 80% of a full 10K ECL level swing.
    Pin
    Symbol
    Function
    相關PDF資料
    PDF描述
    JCUFLMET-77.760MHZ Voltage-Controlled Oscillator
    JCUFLMET-82.944MHZ Voltage-Controlled Oscillator
    JCUFLMUN-15.000MHZ Voltage-Controlled Oscillator
    JCUFLMUN-155.520MHZ Voltage-Controlled Oscillator
    JCUFLMUN-77.760MHZ Voltage-Controlled Oscillator
    相關代理商/技術參數
    參數描述
    JCV1B 制造商:CIT 制造商全稱:CIT Relay & Switch 功能描述:CIT SWITCH
    JCV1G 制造商:CIT 制造商全稱:CIT Relay & Switch 功能描述:CIT SWITCH
    JCV1LB 制造商:CIT 制造商全稱:CIT Relay & Switch 功能描述:CIT SWITCH
    JCV1LG 制造商:CIT 制造商全稱:CIT Relay & Switch 功能描述:CIT SWITCH
    JCV1LR 制造商:CIT 制造商全稱:CIT Relay & Switch 功能描述:CIT SWITCH