1/3 INCH CCD IMAGE SENSOR FOR EIA CAMERA
KC73125UBA
18
HANDLING INSTRUCTIONS
CCD image sensors can be easily damaged by static discharge. Before handling, be sure to take the following
protective measures.
Static Charge Prevention
— Use non chargeable gloves, clothes or material. Also use conductive shoes.
— When handling directly, use an earth band.
— Install a conductive mat on the floor or working table to prevent generation of static electricity.
— Ionized air is recommended for discharging when handling CCD image sensor.
— For the shipment of mounted substrates, use boxes treated for the prevention of static charges.
Soldering
— Make sure the package temperature does not exceed 80
°
C.
— Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a grounded 30W
soldering iron and solder each pin in less than 2 seconds. For repairs and and remount, cool sufficiently.
— To dismount an imaging device, do not use a solder suction equipment. When using an electronic
disoldering tool, use a thermal controller of the zero cross on/off type and connect to ground.
Dust and Dirt Protection
— Operate in the clean environments (around class 1000 will be appropriate).
— Do not either touch glass plates by hand or have object come in contact with glass surface. Should dirt
stick to a glass surface blow it off with an air blow(for dirt stuck through static electricity ionized air is
recommended).
— Clean with a cotton bud and ethyl alcohol if the glass surface is grease stained. Be caerful not to scratch
the glass.
— Keep in case to protect from dust and dirt. To prevent dew condensation, preheat or precool when moving
to a room with great temperature differences.
— When a protective tape is applied before shipping, just before use remove the tape applied electrostatic
protection. Do not reuse the tape.
Do not expose to strong light (sun rays) for long period, color filter are discolored.
Exposure to high temperature or humidity will affect the characteristics. accordingly avoid storage or usage in
such conditions.
CCD image sensors are precise optical equipment that should not be subject to mechanical shocks.