- 您現在的位置：買賣IC網 > PDF目錄373168 > KP100 (INFINEON TECHNOLOGIES AG) Surface Mount Capacitive Silicon Absolute Pressure Sensor PDF資料下載
參數資料
| 型號： | KP100 |
| 廠商： | INFINEON TECHNOLOGIES AG |
| 元件分類： | 壓力傳感器 |
| 英文描述： | Surface Mount Capacitive Silicon Absolute Pressure Sensor |
| 中文描述： | 硅表面貼裝電容絕對壓力傳感器 |
| 文件頁數： | 8/13頁 |
| 文件大小： | 75K |
| 代理商： | KP100 |
KP100
Data Book
8
2003-05
Transfer Function
The general relation between output code and pressure is given by the formula
Interface description
The KP100 digital interface consists of the pins DTA_IN, CLKS, DTA_OUT, CS and
DTA_RDY. The interface is active when CS is low.
At the DTA_RDY pin a pulse of approx. 16 μs appears with a frequency of 7.8 kHz. The
rising edge of this pulse indicates that the output register has been loaded with a new
16 bit wide data word, where the first bit is a parity bit. The data can then be clocked out
by applying a clock signal at CLKS. With every falling edge of CLKS the DTA_OUT is
updated, starting with the parity, followed by the LSB. After the 16
th
falling edge the MSB
appears at DTA_OUT and the readout cycle is completed.
Simultaneously data can be loaded into the KP100 via DTA_IN. The data is clocked in
with every rising edge at CLKS. Only the three last bits of the input data are relevant.
They are used to select the diagnosis modes and to switch between 4 and 8 MHz
operation. After completing a read-write cycle the three input bits can be activated by
applying a positive pulse at CS of at least 50 μs.
If for example the diagnosis mode 1 has been choosen the corresponding diagnosis
value will appear at DTA_OUT in the next read-write cycle.
For the simplest mode of operation the CS and DTA_IN pins are pulled to ground
potential. Then only the pins CLKS, DTA_OUT and DTA_RDY are needed to read the
pressure data, since the power-on condition of the KP100 is to deliver pressure data in
8 MHz mode.
Read Write Cycle
A complete read write cycle is shown in the diagram below. DTA_RDY and DTA_OUT
are KP100 output signals, CLKS, DTA_IN and CS are KP100 input signals. The first 13
DTA_IN bits are don’t care bits.
Y(p)
a
b
p
kPa
----------
c
digit
]
+
=
相關PDF資料 |
PDF描述 |
|---|---|
| KP110 | Absolute Pressure Sensor IC Programmable Temperature Compensation and Calibration On-Chip Signal Conditioning Low Cost Bare Die Version |
| KP120 | Surface Mount Capacitive Silicon Absolute Pressure Sensor |
| KP1830-310-065-G | Polypropylene Film Capacitor |
| KP1830-310-065-D | Circular Connector; Body Material:Aluminum; Series:PT06; No. of Contacts:19; Connector Shell Size:14; Connecting Termination:Solder; Circular Shell Style:Straight Plug; Circular Contact Gender:Socket; Insert Arrangement:14-19 |
| KP1830-310-065-F | Circular Connector; MIL SPEC:MIL-C-26482, Series I, Solder; Body Material:Aluminum; Series:PT06; Number of Contacts:5; Connector Shell Size:14; Connecting Termination:Solder; Circular Shell Style:Straight Plug; Body Style:Straight |
相關代理商/技術參數 |
參數描述 |
|---|---|
| KP-100 | 制造商:Alarm Controls 功能描述:INDOOR KEYPAD 制造商:ALARM CONTROLS 功能描述:INDOOR KEYPAD |
| KP-1000 | 功能描述:端子 Empty Plastic Terminal Kit Box RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規:26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp |
| KP1000A1100-1800V Y45KPE | 制造商:LIUJING 制造商全稱:LIUJING 功能描述:可控硅、晶閘管 |
| KP1000A16 | 制造商:n/a 功能描述:Thyristor Puck |
| KP1000A1600V | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:大功率可控硅KP1000A1600V |
發布緊急采購，3分鐘左右您將得到回復。