hbwhelp@micrel.com or (408) 955-1690 Tag insertion is" />
參數資料
型號： KSZ8993F
廠商： Micrel Inc
文件頁數： 37/100頁
文件大小： 0K
描述： IC CONV MED 10/100 3PORT 128PQFP
標準包裝： 66
系列： *
類型： *
應用： *
安裝類型： 表面貼裝
封裝/外殼： 128-BFQFP
供應商設備封裝： 128-PQFP（14x20）
包裝： 散裝
產品目錄頁面： 1081 (CN2011-ZH PDF)
其它名稱： 576-1033
Micrel, Inc.
KS8993F/FL
June 2009
41
M9999-062509
hbwhelp@micrel.com or (408) 955-1690
Tag insertion is enabled by bit 2 of registers 16, 32 and 48 for ports 1, 2 and 3, respectively.
Optionally, the
Px_TAGINS strap-in pins can be used to enable this feature. At the egress port, untagged packets are tagged with the
ingress port’s default tag. The default tags are programmed in register sets {19,20}, {35,36} and {51,52} for ports 1, 2
and 3, respectively. The KS8993F will not add tags to already tagged packets.
Tag removal is enabled by bit 1 of registers 16, 32 and 48 for ports 1, 2 and 3, respectively.
Optionally, the
Px_TAGRM strap-in pins can be used to enable this feature. At the egress port, tagged packets will have their 802.1Q
VLAN Tags removed. The KS8993F will not modify untagged packets.
The CRC is recalculated for both tag insertion and tag removal.
802.1p priority field re-mapping is a QoS feature that allows the KS8993F to set the “User Priority Ceiling” at any
ingress port. If the ingress packet’s priority field has a higher priority value than the default tag’s priority field of the
ingress port, the packet’s priority field is replaced with the default tag’s priority field. The “User Priority Ceiling” is
enabled by bit 3 of registers 16, 32 and 48 for ports 1, 2 and 3, respectively.
DiffServ based priority
DiffServ based priority uses registers 96 to 103. More details are provided at the beginning of the Advanced Control
Registers section.
2.9.4
Rate Limit Support
The KS8993F supports hardware rate limiting independently on the “receive side” and on the “transmit side” on a per
port basis. Rate limiting is supported in both priority and non-priority environment. The rate limit starts from 0 kbps and
goes up to the line rate in steps of 32 kbps. The KS8993F uses “one second” as the rate limiting interval. At the
beginning of each interval, the counter is cleared to zero, and the rate limit mechanism starts to count the number of
bytes during the interval.
On the “receive side”, if the number of bytes exceeds the programmed limit, the switch will stop receiving packets on
the port until the “one second” interval expires. Flow control can be enabled to prevent packet loss. If the rate limit is
programmed greater than or equal to 128 kbps and the byte counter is 8 Kbytes below the limit, flow control will be
triggered. If the rate limit is programmed lower than 128 kbps and the byte counter is 2 Kbytes below the limit, flow
control will also be triggered.
On the “transmit side”, if the number of bytes exceeds the programmed limit, the switch will stop transmitting packets
on the port until the “one second” interval expires.
If priority is enabled, the KS8993F can be programmed to support different rate limits for high priority packets and low
priority packets.
2.10 Configuration Interface
The KS8993F can operate as both a managed switch and an unmanaged switch.
In unmanaged mode, the KS8993F is typically programmed using an EEPROM.
If no EEPROM is present, the
KS8993F is configured using its default register settings. Some default register settings can be overridden via strap-in
pin options. The strap-in pins are indicated in the “KS8993F Pin Description and I/O Assignment” table in section 1.2.
相關PDF資料
PDF描述
LFXP3C-4QN208I IC FPGA 3.1KLUTS 136I/O 208-PQFP
RF803E-SO IC ENCODER 3 DGTL I/O SOT23-6
AMM22DRYH-S13 CONN EDGECARD 44POS .156 EXTEND
LFXP6E-3T144C IC FPGA 5.8KLUTS 100I/O 144-TQFP
LFXP6E-3TN144C IC FPGA 5.8KLUTS 144TQFP
相關代理商/技術參數
參數描述
KSZ8993F-A1 功能描述:IC CONV MED 10/100 3PORT 128PQFP RoHS:是 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
KSZ8993F-EVAL 功能描述:BOARD EVALUATION FOR KSZ8993F RoHS:是 類別:編程器，開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 類型:MCU 適用于相關產品:Freescale MC68HC908LJ/LK（80-QFP ZIF 插口） 所含物品:面板、纜線、軟件、數據表和用戶手冊 其它名稱:520-1035
KSZ8993FL 功能描述:以太網 IC 2+1 Port 10/100 Switch w/Transceivers & TS-1000 OAM, single 3.3V supply, 128-PQFP, Lead free RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8993FL-EVAL 功能描述:BOARD EVALUATION FOR KSZ8993FL RoHS:是 類別:編程器，開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 類型:MCU 適用于相關產品:Freescale MC68HC908LJ/LK（80-QFP ZIF 插口） 所含物品:面板、纜線、軟件、數據表和用戶手冊 其它名稱:520-1035
KSZ8993I 功能描述:以太網 IC 3 Port 10/100 Switch w/Tranceivers & Frame Buffers, 128-PQFP, I-TEMP RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*