參數資料
型號： KSZ8997
廠商： Micrel Inc
文件頁數： 10/39頁
文件大?。?/td> 0K
描述： IC SWITCH 10/100 8PORT 128PQFP
標準包裝： 66
系列： *
類型： *
應用： *
安裝類型： 表面貼裝
封裝/外殼： 128-BFQFP
供應商設備封裝： 128-PQFP（14x20）
包裝： 托盤
產品目錄頁面： 1081 (CN2011-ZH PDF)
其它名稱： 576-1043
Micrel, Inc.
KS8997/KSZ8997
February 2007
18
M9999-022807-1.1
MAC (Media Access Controller) Operation
The KS8995X strictly abides by IEEE 802.3 standards to maximize compatibility.
Inter-Packet Gap (IPG)
If a frame is successfully transmitted, the 96 bit time IPG is measured between the two consecutive MTXEN. If the
current packet is experiencing collision, the 96 bit time IPG is measured from MCRS and the next MTXEN.
Backoff Algorithm
The KS8997 implements the IEEE Std 802.3 binary exponential back-off algorithm, and optional “aggressive mode”
back off. After 16 collisions, the packet will be optionally dropped depending on the chip configuration in Register 3.
See “Register 3.”
Late Collision
If a transmit packet experiences collisions after 512-bit times of the transmission, the packet will be dropped.
Illegal Frames
The KS8997 discards frames less than 64 bytes and can be programmed to accept frames up to 1536 bytes. Since
the KS8997 supports VLAN tags, the maximum sizing is adjusted when these tags are present.
Flow Control
The KS8997 supports standard 802.3x flow control frames on both transmit and receive sides. On the receive side, if
the KS8997 receives a pause control frame, the KS8997 will not transmit the next normal frame until the timer,
specified in the pause control frame, expires. If another pause frame is received before the current timer expires, the
timer will be updated with the new value in the second pause frame. During this period (being flow controlled), only
flow control packets from the KS8997 will be transmitted. On the transmit side, the KS8997 has intelligent and
efficient ways to determine when to invoke flow control. The flow control is based on availability of the system
resources, including available buffers, available transmit queues and available receive queues.
The KS8997 will flow control a port, which just received a packet, if the destination port resource is being used up.
The KS8997 will issue a flow control frame (XOFF), containing the maximum pause time defined in IEEE standard
802.3x. Once the resource is freed up, the KS8997 will send out the other flow control frame (XON) with zero pause
time to turn off the flow control (turn on transmission to the port). A hysteresis feature is provided to prevent flow
control mechanism from being activated and deactivated too many times. The KS8997 will flow control all ports if the
receive queue becomes full.
Half-Duplex Back Pressure
Half duplex back pressure option (Note: not in 802.3 standards) is also provided. The activation and deactivation
conditions are the same as the above in full-duplex mode. If back pressure is required, the KS8997 will send
preambles to defer other stations’ transmission (carrier sense deference). To avoid jabber and excessive deference
defined in 802.3 standard, after a certain time it will discontinue the carrier sense but it will raise the carrier sense
quickly. This short silent time (no carrier sense) is to prevent other stations from sending out packets and keeps other
stations in carrier sense deferred state. If the port has packets to send during a back pressure situation, the carrier
sense type back pressure will be interrupted and those packets will be transmitted instead. If there are no more
packets to send, carrier sense type back pressure will be active again until switch resources free up. If a collision
occurs, the binary exponential back-off algorithm is skipped and carrier sense is generated immediately, reducing the
chance of further colliding and maintaining carrier sense to prevent reception of packets.
Broadcast Storm Protection
The KS8997 has an intelligent option to protect the switch system from receiving too many broadcast packets.
Broadcast packets will be forwarded to all ports except the source port, and thus will use too many switch resources
(bandwidth and available space in transmit queues). The KS8997 will discard broadcast packets if the number of
those packets exceeds the threshold (configured by strapping during reset and EEPROM settings) in a preset period
of time. If the preset period expires it will then resume receiving broadcast packets until the threshold is reached. The
options are 5% of network line rate for the maximum broadcast receiving threshold or unlimited (feature off).
相關PDF資料
PDF描述
KSZ8995FQI IC SWITCH 10/100 5PORT 128-PQFP
AD9970BCPZ IC PROCESSOR CCD SIGNAL 32LFCSP
ADP5587ACPZ-R7 IC EXPANDER/KEYBOARD CTRLR
LFXP3E-4TN144C IC FPGA 3.1KLUTS 100I/O 144-TQFP
LFXP3C-4TN144C IC FPGA 3.1KLUTS 100I/O 144-TQFP
相關代理商/技術參數
參數描述
KSZ8999 功能描述:以太網 IC 8 Port 10/100 Switch plus MII with PHY and Frame Buffers (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8999-EVAL 功能描述:以太網開發工具 KSZ8999 Evaluation Board RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
KSZ8999-EVAL 制造商:Micrel Inc 功能描述:BOARD EVALUATION FOR KSZ8999
KSZ8999I 功能描述:以太網 IC 8 Port 10/100 Switch plus MII with PHY and Frame Buffers I-temp (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ9021GN 功能描述:以太網 IC Gigabit Ethernet Transceiver with GMII/MII, Lead Free RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*