92706 / 12506 MS OT B8-6041 No.A0206-1/4
LA1652FN
Overview
The LA1652FN time code reception IC receives long-wave time standard broadcasts (such as the Japanese JJY and
German DCF77 standards) and detects and outputs the time code superposed on the long-wave signal.
Applications can automatically correct their clock's time setting by using the time code received by the LA1652FN.
Functions
RF amplifier, rectifier, detector, time code output, and standby circuit.
Features
Low-voltage operation (operating VCC as low as 1.8V).
Standby mode current drain less than or equal to 0.1A.
Japan : JJY 40/60kHz
Germany : DCF77 77.5kHz
Specifications
Maximum Ratings at Ta = 25
°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
VCC max
5.0
V
Allowable power dissipation
Pd max
Ta ≤ 70
°C
10
mW
Operating temperature
Topr
-20 to +70
°C
Storage temperature
Tstg
-40 to +125
°C
Operating Conditions at Ta = 25°C
Ratings
Parameter
Symbol
Conditions
min
typ
max
Unit
Recommended supply voltage
VCC
3.0
V
Operating supply voltage range
VCC op
1.8
3.6
V
Ordering number : ENA0206
Monolithic Linear IC
Time Code Reception IC
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.