
2.3 W 2-Channel AF Power Amplifier
Features
.
Built-in 2 channels enabling use in stereo and bridge
amplifier applications.
.
High output: 2.3 W/channel, V
CC
= 9 V, R
L
= 4
, and
4.7 W/bridge, R
L
= 8
.
.
Minimum number of external parts required : 9 pcs. min.
(Stereo/bridge).
.
Small pop noise at the time of power supply ON/OFF due to
built-in muting circuit.
.
Good ripple rejection ratio due to built-in ripple filter.
.
Soft tone at the time of output saturation.
.
Good channel separation.
.
Voltage gain fixed at 45 dB (Bridge: 51 dB). Variable
voltage gain available with external resistor added.
.
Easy to design radiator fin.
Package Dimensions
unit : mm
3022A-DIP12F
[LA4182]
SANYO : DIP12F
Note) In general applications, heat generated in this package
can be radiated through the Cu-foiled area of the printed
circuit board, but since power dissipation Pd may be
increased depending on the supply voltage and load
conditions, it is recommended to use a fin additionally.
Specifications
Maximum Ratings
at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
V
V
Maximum supply voltage
V
CC
max
With signal
Quiescent
With printed circuit board
(Refer to Pd-Ta characteristics)
11
15
Allowable power dissipation
Pd max
4
W
Operating temperature
Storage temperature
Topr
Tstg
20 to +75
55 to +150
°C
°C
Recommended Operating Conditions
at Ta = 25°C
Parameter
Symbol
V
CC
Conditions
Ratings
Unit
V
Supply voltage
9
Load resitance
R
L
Stereo
Bridge
4 to 8
8
Ordering number: EN742G
Monolithic Linear IC
LA4182
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
41596HA(II)/O207KI/2146KI/4025KI/O291KI,TS No.742-1/9