參數資料
型號: LAN8187
廠商: SMSC Corporation
英文描述: High-Performance MII and RMII 10/100 Ethernet PHY with HP Auto-MDIX
中文描述: 高性能信息產業部及RMII 10/100以太網PHY與HP Auto - MDIX功能
文件頁數: 45/66頁
文件大?。?/td> 545K
代理商: LAN8187
High-Performance MII and RMII 10/100 Ethernet PHY with HP Auto-MDIX
Datasheet
SMSC LAN8187/LAN8187I
45
Revision 0.6 (02-24-06)
DATASHEET
17.9
FARLOOPBACK
Force the module to the FAR Loop Back mode, i.e. all
the received packets are sent back simultaneously (in
100Base-TX only). This bit is only active in RMII
mode. In this mode the user needs to supply a 50MHz
clock to the PHY. This mode works even if MII Isolate
(0.10) is set.
RW
0
17.8
FASTEST
Auto-Negotiation Test Mode
0 = normal operation
1 = activates test mode
RW
0
17.7:5
Reserved
Write as 0, ignore on read.
17.4
REFCLKEN
1= Enables special filtering using a 50 MHz Clock in
10Base-T mode.
RW
0
17.3
PHYADBP
1 = PHY disregards PHY address in SMI access
write.
RW
0
17.2
Force
Good Link Status
0 = normal operation;
1 = force 100TX- link active;
Note:
This bit should be set only during lab testing
RW
0
17.1
ENERGYON
ENERGYON – indicates whether energy is detected
on the line (see
Section 5.4.5.2, "Energy Detect
Power-Down," on page 50
); it goes to “0” if no valid
energy is detected within 256ms. Reset to “1” by
hardware reset, unaffected by SW reset.
RO
1
17.0
Reserved
Write as “0”. Ignore on read.
RW
0
Table 5.39 Register 18 - Special Modes
ADDRESS
NAME
DESCRIPTION
MODE
DEFAULT
18.15:14
MIIMODE
MII Mode
: set the mode of the MII:
0 – MII interface.
1 – RMII interface
RW,
NASR
18.13
CLKSELFREQ
Clock In Selected Frequency. Set the requested input
clock frequency. This bit drives signal that goes to
external logic of the Phy and select the desired
frequency of the input clock:
0 – the clock frequency is 25MHz
1 – Reserved
RO,
NASR
18.12
DSPBP
DSP Bypass mode. Used only in special lab tests.
RW,
NASR
0
18.11
SQBP
SQUELCH Bypass mode.
RW,
NASR
0
18.10
Reserved
RW,
NASR
18.9
PLLBP
PLL Bypass mode.
RW,
NASR
18.8
ADCBP
ADC Bypass mode.
RW,
NASR
Table 5.38 Register 17 - Mode Control/Status (continued)
ADDRESS
NAME
DESCRIPTION
MODE
DEFAULT
相關PDF資料
PDF描述
LAN83C175 Ethernet CARDBUS Integrated Controller With Modem Support
LAN83C180 10/100 FAST ETHERNET PHY TRANSCEIVER
LAN83C185 HIGH PERFORMANCE SINGLE CHIP LOW POWER 10/100 ETHERNET PHYSICAL LAYER TRANSCEIVER
LAN83C183-JD FAST ETHERNET PHYSICAL LAYER DEVICE
LAN83C180TQFP 10/100 FAST ETHERNET PHY TRANSCEIVER
相關代理商/技術參數
參數描述
LAN8187_06 制造商:SMSC 制造商全稱:SMSC 功能描述:【15kV ESD Protected MII/RMII Fast-Ethernet PHY with HP Auto-MDIX and SMSC flexPWRTM
LAN8187I 制造商:SMSC 制造商全稱:SMSC 功能描述:High-Performance MII and RMII 10/100 Ethernet PHY with HP Auto-MDIX
LAN8187I-JT 功能描述:以太網 IC HiPerfrm Ethrnt PHY RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
LAN8187-JT 功能描述:以太網 IC HiPerfrm Ethrnt PHY RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
LAN83C171 制造商:SMSC 制造商全稱:SMSC 功能描述:EPIC/XF ACPI/PC 97 Compliant Integrated PCI 10/100 Mbps Fast Ethernet Controller