
Single-Stage Power Factor Corrected
Off-Line Switching Regulator IC
LC5523F
13
Copyright 2010 Allegro MicroSystems, Inc.
This datasheet is based on Sanken datasheet SSE-24682
The products described herein are manufactured in Japan by Sanken Electric Co., Ltd. for sale by Allegro MicroSystems, Inc.
Sanken and Allegro reserve the right to make, from time to time, such departures from the detail specifications as may be required to permit im-
provements in the performance, reliability, or manufacturability of its products. Therefore, the user is cautioned to verify that the information in this
publication is current before placing any order.
When using the products described herein, the applicability and suitability of such products for the intended purpose shall be reviewed at the users
responsibility.
Application and operation examples described in this document are quoted for the sole purpose of reference for the use of the products herein and
Sanken can assume no responsibility for any infringement of industrial property rights, intellectual property rights or any other rights of Sanken,
Allegro, or any third party which may result from its use.
When using the products specified herein by either (i) combining other products or materials therewith or (ii) physically, chemically or otherwise
processing or treating the products, please duly consider all possible risks that may result from all such uses in advance and proceed therewith at your
own responsibility.
Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products
at a certain rate is inevitable. Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the
equipment or systems against any possible injury, death, fires or damages to the society due to device failure or malfunction.
Sanken products listed in this document are designed and intended for the use as components in general purpose electronic equipment or appa-
ratus (home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Please return to us this document with your
signature(s) or seal(s) prior to the use of the products herein.
When considering the use of Sanken products in the applications where higher reliability is required (traffic signal control systems o equipment, fire/
crime alarm systems, various safety devices, etc.), please contact your nearest Sanken sales representative to discuss, and then return to us this docu-
ment with your signature(s) or seal(s) prior to the use of the products herein.
The use of Sanken products without the written consent of Sanken in the applications where extremely high reliability is required (aerospace equip-
ment, nuclear power control systems, life support systems, etc.) is strictly prohibited.
Anti radioactive ray design is not considered for the products listed herein.
The information included herein is believed to be accurate and reliable. Application and operation examples described in this publication are given
for reference only and Sanken and Allegro assume no responsibility for any infringement of industrial property rights, intellectual property rights, or
any other rights of Sanken or Allegro or any third party that may result from its use. The contents in this document must not be transcribed or copied
without Sanken’s written consent.
Sanken assumes no responsibility for any troubles, such as dropping products caused during transportation out of Sanken's distribution network.
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com