- 您現在的位置：買賣IC網 > PDF目錄30732 > LC74730M ON-SCREEN DISPLAY IC, PDSO30 PDF資料下載
參數資料
| 型號： | LC74730M |
| 元件分類： | 畫面疊加 |
| 英文描述： | ON-SCREEN DISPLAY IC, PDSO30 |
| 封裝： | MFP30S |
| 文件頁數： | 8/14頁 |
| 文件大?。?/td> | 250K |
| 代理商： | LC74730M |
Timing Characteristics at Ta = –30 to +70°C, VDD1 = 5 ± 0.5 V
Pin Functions
No. 4247-3/14
LC74730M
Parameter
Symbol
Conditions
min
typ
max
Unit
Minimum input pulse width
tW (SCLK)
SCLK
200
ns
tW (CS)
CS pin (during the period that CS is high)
1
s
Data setup time
tSU (CS)
CS
200
ns
tSU (SIN)
SIN
200
ns
Data hold time
th (CS)
CS
2
s
th (SIN)
SIN
200
ns
One word write time
tword
The 8-bit data write time
4.2
s
twt
The RAM data write time
1
s
Pin No.
Symbol
Function
Description
1VSS1
Ground
Ground connection
2
XtalIN
Crystal oscillator element
Used to connect the external crystal and capacitors for the crystal oscillator that generates
3
XtalOUT
connection
the internal synchronizing signal. Also used for an external clock input. (2fsc: 7.159 MHz)
4
CTRL1
Crystal oscillator input
Switches between the external 2fsc clock input mode and the crystal resonator driving mode.
switching
Low: crystal oscillator, high: external clock input
5
CSYNOUT
Composite synchronizing
Outputs the composite synchronizing signal. Outputs the crystal oscillator clock on a reset due
signal output
to a low level on the RST pin. Does not output any signal on a command reset.
6
OSCIN
LC oscillator
Connections for the coil and capacitor that form the oscillator that generates the character
7
OSCOUT
output dot clock.
External synchronizing signal
Outputs the judgment as to whether or not an external synchronizing signal is present. Outputs
8
SYNCJDG
state judgment output
a high level when a synchronizing signal is present. Outputs the dot clock (LC oscillator) on a
reset due to a low level on the RST pin. Does not output any signal on a command reset.
9CS
Enable input
Enable input for serial data input. Serial data input is enabled by a low level. A pull-up resistor is
built in. (This input has hysteresis characteristics.)
10
SCLK
Clock input
Serial data input clock input. A pull-up resistor is built in. (This input has hysteresis characteristics.)
11
SIN
Data input
Serial data input. A pull-up resistor is built in. (This input has hysteresis characteristics.)
12
VDD2
Power supply
Video signal level adjustment power supply. (Analog system power supply)
13
COUT
Color signal output
Color (C) signal output
14
NC
This pin must be level open or connected to ground.
15
CIN
Color signal input
Color (C) signal input
16
CBIAS
Chrominance bias output
Chrominance signal bias level output
17
YOUT
Luminance signal output
Luminance signal (Y) output
18
NC
This pin must be level open or connected to ground.
19
YIN
Luminance signal input
Luminance signal (Y) input
20
CTRL2
NTSC/PAL-M switching input
Switches the synchronizing signal generator between NTSC and PAL-M formats. Low: NTSC,
high: PAL-M
21
CVOUT
Composite video signal output
Outputs a composite video signal.
22
NC
This pin must be level open or connected to ground.
23
CVIN
Composite video signal input
Inputs a composite video signal.
24
CTRL3
SEPIN input control
Controls whether the VSYNC signal is input to the SEPIN input. Low: VSYNC is input,
high: VSYNC is not input.
25
SYNIN
Sync separator circuit input
Video signal input to the built-in sync separator circuit. (Input either a horizontal or composite
synchronizing signal to this pin if the built-in sync separator circuit is not used.)
26
SEPC
Sync separator circuit
Adjusts the built-in sync separator circuit. (Connect a capacitor to this pin.)
adjustment
(Leave this pin open if the built-in sync separator circuit is not used.)
27
SEPOUT
Composite synchronizing
Outputs the built-in sync separator circuit composite synchronizing signal.
signal output
(Outputs the SYNIN input signal if the built-in sync separator circuit is not used.)
Vertical synchronizing
Integrates the SEPOUT output signal and inputs a vertical synchronizing signal.
28
SEPIN
signal input
An integration circuit must be connected between this pin and the SEPOUT pin. This pin must
be tied to VDD1 if it is not used.
29
RST
Reset input
The system reset input. A pull-up resistor is built in. (This input has hysteresis characteristics.)
30
VDD1
Power supply (+5 V)
Power supply (+5 V: digital system power supply)
相關PDF資料 |
PDF描述 |
|---|---|
| LC74731W | ON-SCREEN DISPLAY IC, PQFP64 |
| LC74731W | ON-SCREEN DISPLAY IC, PQFP64 |
| LC74732W | ON-SCREEN DISPLAY IC, PQFP64 |
| LC74732W | ON-SCREEN DISPLAY IC, PQFP64 |
| LC74735NW | ON-SCREEN DISPLAY IC, PQFP80 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LC74731 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:On-Screen Display Controller |
| LC74731W | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:On-Screen Display Controller |
| LC74731W_11 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:On-Screen Display Controller |
| LC74731W-9818-E | 功能描述:顯示驅動器和控制器 RoHS:否 制造商:Panasonic Electronic Components 工作電源電壓:2.7 V to 5.5 V 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:QFN-44 封裝:Reel |
| LC74731WS-9818-E | 功能描述:顯示驅動器和控制器 RoHS:否 制造商:Panasonic Electronic Components 工作電源電壓:2.7 V to 5.5 V 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:QFN-44 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。