- 您現在的位置：買賣IC網 > PDF目錄358769 > LC86E4332 (Sanyo Electric Co.,Ltd.) 8-Bit Single Chip Microcontroller with 32K Byte UVEPROM(8位單片微控制器（帶32K字節紫外線可擦除EPROM）) PDF資料下載
參數資料
| 型號： | LC86E4332 |
| 廠商： | Sanyo Electric Co.,Ltd. |
| 英文描述： | 8-Bit Single Chip Microcontroller with 32K Byte UVEPROM(8位單片微控制器（帶32K字節紫外線可擦除EPROM）) |
| 中文描述： | 8位單片機微控制器32K字節UVEPROM（8位單片微控制器（帶32K的字節紫外線可擦除存儲器）） |
| 文件頁數： | 3/19頁 |
| 文件大?。?/td> | 186K |
| 代理商： | LC86E4332 |
LC86E4332
No. 5600-3/19
How to Use
(1) Create a programming data for LC86E4332
Programming data for EPROM of the LC86E4332 is required.
Debugged evaluation file (EVA file) must be converted to an INTEL-HEX formatted file (HEX file) with the file converter
program EVA2HEX.EXE. The HEX file is used as the programming data for the LC86E4332.
(2) How to program for the EPROM
The LC86E4332 can be programmed by the EPROM programmer with attachment W86EP4164D.
Recommended EPROM programmer
"27010 (Vpp = 12.5 V) Intel high speed programming" mode should be adopted.
A jumper (DASEC) must be set to 'OFF' at programming.
There are two ways to program the data of the hexa-decimal file described above into the EPROM of the LC86E4332.
1. How to program the program and the character data individually.
First, the hexa-decimal data of 00h to 07FFFh is programmed into the address 00h to 07FFFh of the EPROM.
Next, write the hexa-decimal data for character addressed 10000h to 17FFFh into the address of 10000h to 17FFFh.
2. How to program the program and the character data simultaneously.
First, copy the program data addressed from 00h to 07FFFh into the addresses 8000h to 0FFFFh with an EPROM
programmer.
Next, write the data of 00h to 17FFFh into the EPROM of the LC86E4332.
An error will occur when the hexa-decimal data generated by the EVA2HEX program is programmed to the EPROM of
the LC86E4332 directly.
(3) How to use the data security function
"Data security" is the function to disable the EPROM data from being read out.
The following is the process in order to execute data security function.
1. Set the jumper of attachment 'ON'.
2. Program again. The EPROM programmer will display an error. The error means that the data security functions
normally. It is not a trouble of the EPROM programmer or the LSI.
Notes
Data security is not executed when the data of all address have 'FF' at sequence 2 above.
Data security cannot be executed by programming the sequential operation "BLANK=>PROGRAM=>VERIFY" at
procedure 2 above.
Set the jumper to 'OFF' after executing the data security.
Advantest
Andou
AVAL
Minato electronics
EPROM programmer
R4945, R4944, R4943
AF-9704
PKW-1100, PKW-3000
MODEL1890A
Manufacturer
Data security
Data security OFF
W86EP4164D
Jumper
Jumper
Pin 1
相關PDF資料 |
PDF描述 |
|---|---|
| LC86E4448 | UVEPROM built-in 8-bit Single Chip Microcontroller(8位單片微控制器（帶內置式紫外線可擦除EPROM）) |
| LC86E4564 | 8-Bit Single Chip Microcontroller with 64K Byte UVEPROM(8位單片微控制器（帶64K字節紫外線可擦除EPROM）) |
| LC86E5032 | 8-Bit Single Chip Microcontroller with 32K Byte UVEPROM(8位單片微控制器（帶32K字節紫外線可擦除EPROM）) |
| LC86E6032 | 8-Bit Single Chip Microcontroller with 32K Byte UVEPROM(8位單片微控制器（帶32K字節紫外線可擦除EPROM）) |
| LC86E6232 | 8-Bit Single Chip Microcontroller with 32K Byte UVEPROM(8位單片微控制器（帶32K字節紫外線可擦除EPROM）) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LC86E4448 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:UVEPROM built-in 8-Bit Single Chip Microcontroller |
| LC86E4564 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:8-Bit Single-Chip Microcontroller |
| LC86E4632 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
| LC86E4633 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
| LC86E4732 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。