參數資料
型號： LIS3L02DQ-TR
廠商： STMICROELECTRONICS
元件分類： 模擬信號調理
英文描述： SPECIALTY ANALOG CIRCUIT, QCC44
封裝： 7 X 7 MM, 1.80 MM HEIGHT, QFN-44
文件頁數： 20/20頁
文件大小： 473K
代理商： LIS3L02DQ-TR
Obsolete
Product(s)
- Obsolete
Product(s)
Obsolete
Product(s)
- Obsolete
Product(s)
9/20
LIS3L02DQ
ing the acknowledge pulse. The receiver must then pull the data line LOW so that it remains stable low
during the HIGH period of the acknowledge clock pulse. A receiver which has been addressed is obliged
to generate an acknowledge after each byte of data has been received.
The I2C embedded inside the LIS3L02DQ behaves like a slave device and the following protocol must be
adhered to. After the start condition (ST) a slave address is sent, once a slave acknowledge has been
returned, a 8-bit sub-address will be transmitted: the 7 LSB represent the actual register address while the
MSB enables address autoincrement. If the MSB of the SUB field is 1, the SUB (register address) will be
automatically incremented to allow multiple data read/write.
If the LSB of the slave address is ‘1’ (read), a repeated START condition will have to be issued after the
two sub-address bytes; if the LSB is ‘0’ (write) the Master will transmit to the slave with direction un-
changed.
Transfer when Master is writing one byte to slave
Transfer when Master is writing multiple bytes to slave:
Transfer when Master is receiving (reading) one byte of data from slave:
Transfer when Master is receiving (reading) multiple bytes of data from slave
Data is transmitted in byte format. Each data transfer contains 8 bits. The number of bytes transferred per
transfer is unlimited. Data is transferred with the Most Significant Bit (MSB) first. If a receiver can’t receive
another complete byte of data until it has performed some other function, it can hold the clock line, SCL
LOW to force the transmitter into a wait state. Data transfer only continues when the receiver is ready for
another byte and releases the data line. If a slave receiver doesn’t acknowledge the slave address (i.e. it
is not able to receive because it is performing some real time function) the data line must be left HIGH by
the slave. The Master can then abort the transfer. A LOW to HIGH transition on the SDA line while the
SCL line is HIGH is defined as a STOP condition. Each data transfer must be terminated by the generation
of a STOP condition.
In order to read multiple bytes, it is necessary to assert the most significant bit of the sub-address field. In
other words, SUB(7) must be equal to 1 while SUB(6-0) represents the address of first register to read.
Master
ST
SAD + W
SUB
DATA
SP
Slave
SAK
Master
ST
SAD + W
SUB
DATA
SP
Slave
SAK
Master
ST
SAD + W
SUB
SR
SAD + R
NMAK
SP
Slave
SAK
DATA
Master
ST
SAD + W
SUB
SR
SAD + R
MAK
Slave
SAK
DATA
Master
SR
MAK
NMAK
SP
Slave
DATA
相關PDF資料
PDF描述
LIS3L02DQ SPECIALTY ANALOG CIRCUIT, QCC44
LIT1108CS8-5#PBF 1.5 A SWITCHING REGULATOR, 25 kHz SWITCHING FREQ-MAX, PDSO8
LIT1108CS8-12#PBF 1.5 A SWITCHING REGULATOR, 25 kHz SWITCHING FREQ-MAX, PDSO8
LK1001-7EDDT 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
LK1001-7ERD6TB1 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
相關代理商/技術參數
參數描述
LIS3L02DS 制造商:STMicroelectronics 功能描述:
LIS3L06AL 功能描述:加速計 - 板上安裝 3-axis +/-2g/+/-6g MEMS Intertial Sensr RoHS:否 制造商:Murata 傳感軸:Double 加速:12 g 靈敏度: 封裝 / 箱體: 輸出類型:Analog 數字輸出 - 位數:11 bit 電源電壓-最大:5.25 V 電源電壓-最小:4.75 V 電源電流:4 mA 最大工作溫度:+ 125 C 最小工作溫度:- 40 C
LIS3L06AL_06 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:MEMS INERTIAL SENSOR-3-axis - +/-2g/6g ultracompact linear accelerometer
LIS3L06ALTR 功能描述:加速計 - 板上安裝 MEMS INERTIAL snsr 3 axis RoHS:否 制造商:Murata 傳感軸:Double 加速:12 g 靈敏度: 封裝 / 箱體: 輸出類型:Analog 數字輸出 - 位數:11 bit 電源電壓-最大:5.25 V 電源電壓-最小:4.75 V 電源電流:4 mA 最大工作溫度:+ 125 C 最小工作溫度:- 40 C
LIS3LV02DL 功能描述:加速計 - 板上安裝 MEMS INERTIAL SENSOR RoHS:否 制造商:Murata 傳感軸:Double 加速:12 g 靈敏度: 封裝 / 箱體: 輸出類型:Analog 數字輸出 - 位數:11 bit 電源電壓-最大:5.25 V 電源電壓-最小:4.75 V 電源電流:4 mA 最大工作溫度:+ 125 C 最小工作溫度:- 40 C
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*