• <samp id="2iisv"><label id="2iisv"></label></samp>
            
    
    
    參數資料
    型號: LK2540-7RD2TB1
    元件分類: 電源模塊
    英文描述: 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
    封裝: METAL, CASE K02, MODULE
    文件頁數: 1/27頁
    文件大?。?/td> 640K
    代理商: LK2540-7RD2TB1
    K-Family
    DC-DC Converters >100 W
    Rugged Environment
    8 - 2
    Edition 2/96 - Melcher AG
    MELCHER
    The Power Partners.
    8.1
    150 W DC-DC (AC-DC) Converters
    K-Family
    Input to output isolation
    Single output:
    AK...LK 1000
    Double output: AK...LK 2000
    Extremely wide input voltage range
    Input over- and undervoltage lock-out
    Efficient input filter and built-in surge and transient
    suppression circuitry
    4 kVrms input to output isolation test voltage
    Fully isolated outputs
    Outputs open- and short-circuit proof
    No derating over entire operating temperature range
    Safety according to IEC 950
    V
    DE
    C
    Table of Contents
    Page
    Description .................................................................. 8 - 2
    Type Survey ................................................................ 8 - 3
    Safety and Installation Instructions ............................. 8 - 4
    Functional Description ................................................. 8 - 6
    Electrical Input Data .................................................... 8 - 7
    Electromagnetic Compatibility EMC ............................ 8 - 9
    Electrical Output Data ............................................... 8 - 11
    Supplementary Data ................................................. 8 - 19
    Description of Options ............................................... 8 - 19
    Immunity to Environmental Conditions ...................... 8 - 26
    Mechanical Data ....................................................... 8 - 27
    Type Key and Product Marking ................................. 8 - 28
    Description
    Full input to output, input to case, output to case and output
    to output isolation is provided. The modules are designed
    and built according to the international safety standards
    IEC 950 and have been approved by the safety agencies
    VDE (Germany) and UL (USA). The UL Mark for Canada
    has been officially recognized be regulatory authorities in
    provinces across Canada.
    The case design allows operation at nominal load up to
    71
    °C in a free air ambient temperature. If forced cooling is
    provided, the ambient temperature may exceed 71
    °C but
    the case temperature must remain below 95
    °C under all
    conditions.
    A temperature sensor generates an inhibit signal which
    disables the outputs if the case temperature
    TC exceeds the
    limit. The outputs are automatically re-enabled when the
    temperature drops below the limit.
    Various options are available to adapt the converters to in-
    dividual applications.
    The modules may either be plugged into 19 inch rack sys-
    tems according to DIN 41494, or be chassis mounted.
    Case: Aluminium, black finish, self cooling.
    The K-family of DC-DC (AC-DC) converters represents a
    broad and flexible range of power supplies for use in ad-
    vanced electronic systems. Features include high effi-
    ciency, high reliability, low output voltage noise and excel-
    lent dynamic response to load/line changes.
    The converter inputs are protected against surges and tran-
    sients occuring on the source lines. Input over- and
    undervoltage lock-out circuitry disables the outputs if the
    input voltage is outside the specified ranges. Certain types
    include an inrush current limitation preventing circuit break-
    ers and fuses from being damaged at switch-on.
    All outputs are open- and short-circuit proof and are pro-
    tected against overvoltages by means of a built-in suppres-
    sor diode. The outputs can be inhibited by a logic signal ap-
    plied to the connector pin i. If the inhibit function is not used
    pin 18 must be connected with pin 14 to enable the outputs.
    LED indicators display the status of the converter and allow
    visual monitoring of the system at any time.
    相關PDF資料
    PDF描述
    LK2540-7RD9TB1 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
    LK2540-9ERD3TB1 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
    LK2540-9ERD8B1 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
    LK2540-9ERD9 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
    LK2660-7EPD2 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
    相關代理商/技術參數
    參數描述
    LK2540-7RTB1 制造商:Power-One 功能描述:LK Series 150 W Single Output 30 V AC/DC Power Supply Converter
    LK2540-9ER 制造商:Power-One 功能描述:ACDC - Bulk
    LK2540-9R 制造商:Power-One 功能描述:LK Series 150W Dual Output +-12V AC/DC Power Supply
    LK25WKWO1-12-JC 功能描述:按鈕開關 DPDT MOM SILVER SOLDER LUG RoHS:否 制造商:C&K Components 觸點形式:2 NC - 2 NO 開關功能:ON ? OFF 電流額定值:4 A 電壓額定值 AC:12 V to 250 V 電壓額定值 DC:12 V to 50 V 功率額定值: 安裝風格:Through Hole 照明:Illuminated 照明顏色:None IP 等級:IP 40 端接類型:Solder 觸點電鍍:Silver 執行器:Square 蓋顏色: 封裝: 可燃性等級:UL 94 V-0
    LK2660-7ERT 制造商:Power-One 功能描述:AC DC - Bulk