參數資料
型號: LK4601-9PD9TB1
廠商: POWER-ONE INC
元件分類: 電源模塊
英文描述: 1-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
封裝: HEAT SINK, METAL, CASE K02
文件頁數: 19/28頁
文件大小: 1215K
代理商: LK4601-9PD9TB1
K Series
AC-DC Converters >100 Watt
Rugged Environment
Edition 4/4.99
26/28
MELCHER
The Power Partners.
Vo1+
Vo1–
V
UV
IV
Rp
Input
11009
V ACFAIL Signal (VME)
Available for units with
Uo1 = 5.1 V.
This option denes an undervoltage monitoring circuit for
the input or input and main output voltage equivalent to op-
tion D and generates the ACFAIL signal (V signal) which
conforms to the VME standard.
The low state level of the ACFAIL signal is specied at a
sink current of
IV ≤ 48 mA to UV ≤ 0.6 V (open-collector out-
put of a NPN transistor). The pull-up resistor feeding the
open-collector output should be placed on the VME back
plane.
After the ACFAIL signal has gone low, the VME standard
requires a hold-up time
th of at least 4 ms before the 5.1 V
output drops to 4.875 V when the output is fully loaded. This
hold-up time
th is provided by the internal input capaci-
tance. See also g.:
Hold-up Time versus Output Power.
Table 20: Undervoltage monitor functions
V output
Monitoring
Minimum adjustment
(VME compatible)
Ui
Uo1
range of threshold level
Uti
Uto
V2
yes
no
355V DC 1
V3
yes
355V DC 1 0.95...0.985
Uo1 2
1 Option D monitors the boost regulator output voltage. The trig-
ger level is adjusted in the factory to 355 V DC.
2 Fixed value between 95% and 98.5% of Uo1.
V output (V2, V3):
Connector pin V is internally connected to the open collec-
tor of a NPN transistor. The emitter is connected to the
negative potential of output 1.
UV ≤ 0.6 V (logic low) corre-
sponds to a monitored voltage level (
Ui and/or Uo1) <Ut.
The current
IV through the open collector should not ex-
ceed 50 mA. The NPN output is not protected against exter-
nal overvoltages.
UV should not exceed 60 V.
Ui, Uo1 status
V output,
UV
Ui or Uo1 < Ut
low, L,
UV ≤ 0.6 V at IV = 50 mA
Ui and Uo1 > Ut + Uh
high, H,
IV ≤ 25 A at UV = 5.1 V
Fig. 39
Output conguration of options V2 and V3
Option V operates independently of the built-in input under-
voltage lock-out circuit. A logic "low" signal is generated at
pin 20 as soon as one of the monitored voltages drops be-
low the preselected threshold level
Ut. The return for this
signal is Vo1–. The V output recovers when the monitored
voltage(s) exceed(s)
Ut + Uh. The threshold level Uti is ad-
justed in the factory to 355 V DC. The threshold level
Uto
either is adjusted during manufacture to a determined cus-
tomer specied value.
相關PDF資料
PDF描述
LK4601-9RD9B1 1-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK4601-9TB2 1-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5320-7D0B1 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5320-7ED2TB2 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5320-7ED8B1 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
相關代理商/技術參數
參數描述
LK4602-9ER-D8T-G16-K020C 制造商:Power-One 功能描述:- Bulk
LK460D3LA29 制造商:Sharp Microelectronics Corporation 功能描述:46" (1920X1080)
LK460D3LZ19 制造商:Sharp Microelectronics Corporation 功能描述:46.0 inch 1920 x 1080 Digital Landscape CCFL TFT LCD Module
LK-470-001 功能描述:LED MODULE 1W BLUE RoHS:是 類別:光電元件 >> LED - 高亮度電源模塊 系列:- 標準包裝:36 系列:5027 TFFC STAR K2 顏色:暖白色 配置:星形 在特定電流下的光通量 - 測試:75lm 電流 - 測試:350mA 電流 - 最大:1.5A 帶連接器:無 驅動器電路:無 波長:- 電壓:-
LK-470-001-FC 功能描述:LED MODULE 1W BLUE W/CONN RoHS:是 類別:光電元件 >> LED - 高亮度電源模塊 系列:- 標準包裝:36 系列:5027 TFFC STAR K2 顏色:暖白色 配置:星形 在特定電流下的光通量 - 測試:75lm 電流 - 測試:350mA 電流 - 最大:1.5A 帶連接器:無 驅動器電路:無 波長:- 電壓:-