參數資料
型號: LK5660-7EPD4B2
廠商: POWER-ONE INC
元件分類: 電源模塊
英文描述: 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
封裝: METAL, CASE K02, MODULE
文件頁數: 19/28頁
文件大?。?/td> 1215K
代理商: LK5660-7EPD4B2
K Series
AC-DC Converters >100 Watt
Rugged Environment
Edition 4/4.99
26/28
MELCHER
The Power Partners.
Vo1+
Vo1–
V
UV
IV
Rp
Input
11009
V ACFAIL Signal (VME)
Available for units with
Uo1 = 5.1 V.
This option denes an undervoltage monitoring circuit for
the input or input and main output voltage equivalent to op-
tion D and generates the ACFAIL signal (V signal) which
conforms to the VME standard.
The low state level of the ACFAIL signal is specied at a
sink current of
IV ≤ 48 mA to UV ≤ 0.6 V (open-collector out-
put of a NPN transistor). The pull-up resistor feeding the
open-collector output should be placed on the VME back
plane.
After the ACFAIL signal has gone low, the VME standard
requires a hold-up time
th of at least 4 ms before the 5.1 V
output drops to 4.875 V when the output is fully loaded. This
hold-up time
th is provided by the internal input capaci-
tance. See also g.:
Hold-up Time versus Output Power.
Table 20: Undervoltage monitor functions
V output
Monitoring
Minimum adjustment
(VME compatible)
Ui
Uo1
range of threshold level
Uti
Uto
V2
yes
no
355V DC 1
V3
yes
355V DC 1 0.95...0.985
Uo1 2
1 Option D monitors the boost regulator output voltage. The trig-
ger level is adjusted in the factory to 355 V DC.
2 Fixed value between 95% and 98.5% of Uo1.
V output (V2, V3):
Connector pin V is internally connected to the open collec-
tor of a NPN transistor. The emitter is connected to the
negative potential of output 1.
UV ≤ 0.6 V (logic low) corre-
sponds to a monitored voltage level (
Ui and/or Uo1) <Ut.
The current
IV through the open collector should not ex-
ceed 50 mA. The NPN output is not protected against exter-
nal overvoltages.
UV should not exceed 60 V.
Ui, Uo1 status
V output,
UV
Ui or Uo1 < Ut
low, L,
UV ≤ 0.6 V at IV = 50 mA
Ui and Uo1 > Ut + Uh
high, H,
IV ≤ 25 A at UV = 5.1 V
Fig. 39
Output conguration of options V2 and V3
Option V operates independently of the built-in input under-
voltage lock-out circuit. A logic "low" signal is generated at
pin 20 as soon as one of the monitored voltages drops be-
low the preselected threshold level
Ut. The return for this
signal is Vo1–. The V output recovers when the monitored
voltage(s) exceed(s)
Ut + Uh. The threshold level Uti is ad-
justed in the factory to 355 V DC. The threshold level
Uto
either is adjusted during manufacture to a determined cus-
tomer specied value.
相關PDF資料
PDF描述
LK5660-7EPDDB1 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5660-7ERTB2 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5660-7ERT 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5660-9B1 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5660-9D6 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
相關代理商/技術參數
參數描述
LK5660-7R 功能描述:線性和開關式電源 24V/3A OUT AC-DC CONVERTER RoHS:否 制造商:TDK-Lambda 產品:Switching Supplies 開放式框架/封閉式:Enclosed 輸出功率額定值:800 W 輸入電壓:85 VAC to 265 VAC 輸出端數量:1 輸出電壓(通道 1):20 V 輸出電流(通道 1):40 A 商用/醫用: 輸出電壓(通道 2): 輸出電流(通道 2): 安裝風格:Rack 長度: 寬度: 高度:
LK5660-9ER 制造商:Power-One 功能描述:AC/DC PS DUAL-OUT 24V/24V 5.2A/5.2A 280W 15PIN - Bulk
LK-590-001 功能描述:LED MODULE 1W AMBER RoHS:是 類別:光電元件 >> LED - 高亮度電源模塊 系列:- 標準包裝:36 系列:5027 TFFC STAR K2 顏色:暖白色 配置:星形 在特定電流下的光通量 - 測試:75lm 電流 - 測試:350mA 電流 - 最大:1.5A 帶連接器:無 驅動器電路:無 波長:- 電壓:-
LK-590-001-FC 功能描述:LED MODULE 1W AMBER W/CONN RoHS:是 類別:光電元件 >> LED - 高亮度電源模塊 系列:- 標準包裝:36 系列:5027 TFFC STAR K2 顏色:暖白色 配置:星形 在特定電流下的光通量 - 測試:75lm 電流 - 測試:350mA 電流 - 最大:1.5A 帶連接器:無 驅動器電路:無 波長:- 電壓:-
LK-59A-1 制造商:ITT Interconnect Solutions 功能描述:OBS - Bulk