SLOS068P JUNE 1976 REVISED SEPTEMBER 2004
4
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
LM158, LM158A
LM258, LM258A
LM358, LM358A
LM2904V
±
16 or 32
LM2904
UNIT
Supply voltage, VCC (see Note 1)
Differential input voltage, VID (see Note 2)
Input voltage, VI (either input)
Duration of output short circuit (one amplifier) to ground
at (or below) 25
°
C free-air temperature (VCC
≤
15 V) (see Note 3)
±
13 or 26
±
26
0.3 to 26
V
±
32
V
0.3 to 32
V
Unlimited
Unlimited
D package
97
97
DGK package
172
172
Package thermal impedance, JA (see Notes 4 and 5)
P package
85
85
°
C/W
PS package
95
95
PW package
149
149
Package thermal impedance, JC (see Notes 6 and 7)
FK package
5.61
C/W
°
JG package
14.5
LM158, LM158A
55 to 125
Operating free-air temperature range, TA
LM258, LM258A
25 to 85
°
C
LM358, LM358A
0 to 70
LM2904
40 to 125
40 to 125
Operating virtual junction temperature, TJ
Case temperature for 60 seconds
150
150
°
C
°
C
°
C
°
C
FK package
260
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds
JG package
300
300
Storage temperature range, Tstg
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES:
1. All voltage values, except differential voltages and VCC specified for measurement of IOS, are with respect to the network ground
terminal.
2. Differential voltages are at IN+ with respect to IN.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150
°
C can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of TJ(max), JC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) TC)/JC. Operating at the absolute maximum TJ of 150
°
C can affect reliability.
7. The package thermal impedance is calculated in accordance with MIL-STD-883.
65 to 150
65 to 150