General Description
The LM393
consists of two independent precision
voltage comparators with an offset voltage specification as
low as 2.0 mV max for two comparators which were de-
signed specifically to operate from a single power supply
over a wide range of voltages. Operation from split power
supplies is also possible and the low power supply current
drain is independent of the magnitude of the power supply
voltage. These comparators also have a unique characteris-
tic in that the input common-mode voltage range includes
ground, even though operated from a single power supply
voltage.
Application areas include limit comparators, simple analog to
digital converters; pulse, squarewave and time delay gen-
erators; wide range VCO; MOS clock timers; multivibrators
and high voltage digital logic gates. The
designed to directly interface with TTL and CMOS. When op-
erated from both plus and minus power supplies, the
will directly interface with MOS logic where their low
power drain is a distinct advantage over standard compara-
tors.
Advantages
n
High precision comparators
n
Reduced V
OS
drift over temperature
n
Eliminates need for dual supplies
n
Allows sensing near ground
n
Compatible with all forms of logic
n
Power drain suitable for battery operation
Features
n
Wide supply
— Voltage range:
— single or dual supplies:
n
Very low supply current drain (0.4 mA) — independent
of supply voltage
n
Low input biasing current:
n
Low input offset current:
n
Maximum offset voltage:
n
Input common-mode voltage range includes ground
n
Differential input voltage range equal to the power
supply voltage
n
Low output saturation voltage,:
n
Output voltage compatible with TTL, DTL, ECL, MOS
and CMOS logic systems
2.0V to 36V
±
1.0V to
±
18V
25 nA
±
5 nA
±
9m V
Wing Shing Computer Components Co., (H.K.)Ltd.
Homepage:
http://www.wingshing.com
Tel:(852)2341 9276 Fax:(852)2797 8153
E-mail: wsccltd@hkstar.com
Dual Differential Comparators
Pin Configuration
1
WS393MX
150
mV at 4 mA
LM393
LM393 was
DIP-8
SOP-8 LM393M
LM393N