- 您現在的位置：買賣IC網 > PDF目錄384602 > LMC1982CIV (NATIONAL SEMICONDUCTOR CORP) Digitally-Controlled Stereo Tone and Volume Circuit with Two Selectable Stereo Inputs PDF資料下載
參數資料
| 型號： | LMC1982CIV |
| 廠商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分類： | 音頻控制 |
| 英文描述： | Digitally-Controlled Stereo Tone and Volume Circuit with Two Selectable Stereo Inputs |
| 中文描述： | 2 CHANNEL(S), TONE CONTROL CIRCUIT, PQCC28 |
| 封裝： | PLASTIC, LCC-28 |
| 文件頁數： | 10/14頁 |
| 文件大?。?/td> | 348K |
| 代理商： | LMC1982CIV |
Application Information
(Continued)
The bass turn-over frequency is nominally
when maximum boost is chosen. The inflection points (the
frequencies where the boost or cut is within 3 dB of the final
value) are for treble and bass
Increasing the values of C2 and C3 decreases the turnover
and inflection frequencies: i.e., the Tone Control Response
Curves shown in Typical Performance Curves will shift left
when C2 and C3 are increased and shift right when C2 and
C3 are decreased. With C2 = C3 = 0.0082 μF, 2 dB steps
are achieved at 100 Hz and 10 kHz. Changing C2 and C3 to
0.01 μF shifts the 2 dB per step frequency to 72 Hz and
8.3 kHz. If the tone control capacitors size is decreased
these frequencies will increase. With C2 = C3 = 0.0068 μF
the 2 dB steps take place at 130 Hz and 11.2 kHz.
LOUDNESS
The human ear has less sensitivity to high and low frequen-
cies relative to its sensitivity to mid-range frequencies be-
tween 2 kHz and 6 kHz for any given acoustic level. The low
and high frequency sensitivity decreases faster than the sen-
sitivity to the mid-range frequencies as the acoustic level
drops. The LMC1982’s loudness function can be used to
help compensate for the decreased sensitivity by boosting
the gain at low and high frequencies as the volume control
attenuation increases (see the curve labeled “Gain vs Fre-
quency with Loudness Active”).
The LMC1982’s loudness function uses external compo-
nents R1, R2, C4 and C5, as shown in Figure 5 to select the
frequencies where bass and treble boost begin. The amount
of boost is dependent on the volume attenuator’s setting.
The loudness characteristic, with the volume attenuator set
at 40 dB, has a transfer function of
The external components R1 and C4 can be eliminated and
pin 10(19) left open if bass boost is the only desired loud-
ness characteristic.
DS011028-7
FIGURE 3. System Block Diagram Utilizing the External Processing Loop (One Channel Shown)
DS011028-8
FIGURE 4. The Tone Control Amplifier
www.national.com
10
相關PDF資料 |
PDF描述 |
|---|---|
| LMC1983 | Digitally-Controlled Stereo Tone and Volume Circuit with Three Selectable Stereo Inputs |
| LMC1983CIN | Pushbutton Switch; Actuator Style:Rectangular; Circuitry:DPST-1NO/1NC; Switch Operation:On-(On); Contact Current Max:5A; Collar Shape:Rectangular; Features:Illuminated; Leaded Process Compatible:Yes; Mounting Type:PCB |
| LMC1983CIV | Digitally-Controlled Stereo Tone and Volume Circuit with Three Selectable Stereo Inputs |
| LMC1992 | LMC1992 Digitally-Controlled Stereo Tone and Volume Circuit with Four-Channel Input-Selector |
| LMC1992CCN | LMC1992 Digitally-Controlled Stereo Tone and Volume Circuit with Four-Channel Input-Selector |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LMC1982CIVX | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Tone/Volume/Balance Control |
| LMC1983 | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Digitally-Controlled Stereo Tone and Volume Circuit with Three Selectable Stereo Inputs |
| LMC1983CIN | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| LMC1983CIV | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| LMC1983CIVX | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Tone/Volume/Balance Control |
發布緊急采購，3分鐘左右您將得到回復。