- 您現在的位置：買賣IC網 > PDF目錄44232 > LMZ1301-9ERD1H 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | LMZ1301-9ERD1H |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE |
| 封裝： | METAL, CASE M02, MODULE |
| 文件頁數： | 10/25頁 |
| 文件大?。?/td> | 569K |
| 代理商： | LMZ1301-9ERD1H |
Cassette Style
DC-DC Converters
M Series
Edition 01/01.2001
18/25
Isolation
The electric strength test is performed as a factory test in
accordance with IEC/EN 60950 and UL 1950 and should
not be repeated in the field. Power-One will not honour any
Table 15: Isolation
Characteristic
Input to
Output to Output to Output to
Unit
case
output
case
output
class I
class II
class I
class II
option H
Electric
Required according to
1.5
3.0
3.0 1
3.0
0.5
-
kVrms
strength
IEC/EN 60950
2.1
4.2
4.2 1
4.2
0.7
-
kV DC
test voltage
Actual factory test 1 s
2.8
5.6
5.6 1
5.6
1.4
2.8
0.3
AC test voltage equivalent
2.0
4.0
4.0 1
4.0
1.0
2.0
0.2
kVrms
to actual factory test
Insulation resistance at 500 V DC
>300
>100 2
M
1 In accordance with IEC/EN 60950 only subassemblies are tested in factory with this voltage.
2 Tested at 300 V DC.
For creepage distances and clearances refer to:
Technical Information: Safety.
Safety of Operator Accessible Output Circuit
If the output circuit of a DC-DC converter is operator acces-
sible, it shall be an SELV circuit according to the IEC/EN
60950 related safety standards.
Since the M series DC-DC converters provide double or re-
inforced insulation between input and output, based on a
rated primary input voltage of 250 V AC and 400 V DC (for
class II units 250 V AC and DC), only operational insulation
is needed between the AC mains and the input of the DC-
DC converter. This means that there is no need for an elec-
trical isolation between the AC mains circuit and the DC-DC
converter input circuit to cause the output of an M series
DC-DC converter to be an SELV circuit. Only voltage
adaption and rectification to the specified input voltage
range of the DC-DC converter is needed.
The following table shows a possible installation configura-
tion, compliance with which causes the output circuit of the
DC-DC converter to be an SELV circuit according to IEC/
EN 60950 up to a configured output voltage (sum of nomi-
nal voltages if in series or +/– configuration) of 36 V.
However, it is the sole responsibility of the installer to as-
sure the compliance with the relevant and applicable safety
regulations. More information is given in:
Technical Infor-
mation: Safety.
Table 16: Safety concept leading to an SELV output circuit
Conditions
Front end
DC-DC converter
Result
Nominal
Minimum required grade
Maximum rated
Minimum required
Equip-
Measures to achieve the
Safety status
supply
of insulation, to be pro-
DC output voltage
safety status of the
ment
specified safety status of
of the DC-DC
voltage
vided by the AC-DC front
from the front end
front end output
the output circuit
converter
end, including mains
circuit
output circuit
supplied battery charger
Mains
Operational (i.e. there is
≤400 V 1 (The
Primary circuit
Class I
Double or reinforced
SELV circuit
≤250 V AC no need for electrical
rated voltage
(A...LM) insulation, based on
isolation between the
between any input
250 V AC and 400 V DC
mains supply voltage and
pin and earth can
(provided by the DC-DC
theDC-DC converter
be up to 250 V AC
converter) and earthed
input voltage)
or 400 V DC)
case 2
≤250 V 1 (The
Class II
Double or reinforced
rated voltage
(CMZ,
insulation, based on
between any input
DMZ,
250 V AC or DC (provided
pin and earth can
LMZ)
by the DC-DC converter)
be up to 250 V AC
or DC)
1 The front end output voltage should match the specified operating input voltage range of the DC-DC converter.
2 The earth connection has to be provided by the installer according to the relevant safety standard, e.g. IEC/EN 60950.
guarantee/warranty claims resulting from electric strength
field tests.
相關PDF資料 |
PDF描述 |
|---|---|
| LMZ1301-9ERD2H | 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE |
| LMZ1301-9RD6AHF | 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE |
| LMZ1501-7ERD6AHF | 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE |
| LMZ1501-7PA | 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE |
| LMZ1501-7PD0A | 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LMZ13608 | 制造商:TI 制造商全稱:Texas Instruments 功能描述:SIMPLE SWITCHER?? Power Module with 36V Maximum Input Voltage |
| LMZ13608EVAL/NOPB | 功能描述:電源管理IC開發工具 LMZ13608 EVAL BOARD RoHS:否 制造商:Maxim Integrated 產品:Evaluation Kits 類型:Battery Management 工具用于評估:MAX17710GB 輸入電壓: 輸出電壓:1.8 V |
| LMZ13608TZ | 制造商:TI 制造商全稱:Texas Instruments 功能描述:SIMPLE SWITCHER?? Power Module with 36V Maximum Input Voltage |
| LMZ13608TZ/NOPB | 功能描述:直流/直流開關調節器 RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5 |
| LMZ13608TZE | 制造商:TI 制造商全稱:Texas Instruments 功能描述:SIMPLE SWITCHER?? Power Module with 36V Maximum Input Voltage |
發布緊急采購，3分鐘左右您將得到回復。