- 您現在的位置：買賣IC網 > PDF目錄358907 > LP2967 (NATIONAL SEMICONDUCTOR CORP) Dual Micropower 150 mA Low-Dropout Regulator in micro SMD Package PDF資料下載
參數資料
| 型號： | LP2967 |
| 廠商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分類： | 基準電壓源/電流源 |
| 英文描述： | Dual Micropower 150 mA Low-Dropout Regulator in micro SMD Package |
| 中文描述： | DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PBGA8 |
| 封裝： | MICRO, BUMP, SMD-8 |
| 文件頁數： | 13/17頁 |
| 文件大小： | 612K |
| 代理商： | LP2967 |
Application Hints
EXTERNAL CAPACITORS
The LP2967 low dropout regulator requires two external
capacitors, C
IN
and C
to assure the device’s output
stability. C
BYPASS
may be used to reduce output noise. The
capacitors must be correctly selected with respect to capaci-
tance values for all three capacitors and ESR value for
C
OUT
.
Input Capacitor
An input capacitor with a minimum capacitance value of 1μF
is required between the LP2967 input and ground (the
amount of capacitance may be increased without limit). This
capacitor must be located a distance of not more than 0.5
inches from the input pin and returned to a clean analog
ground. Any good quality ceramic or tantalum may be used
for this capacitor.
Output Capacitor
The output capacitor must meet the requirement for mini-
mum capacitance value of 2.2 μF and also have an appro-
priate ESR (equivalent series resistance) value. The LP2967
is actually designed to work with ceramic or tantalum output
capacitors, utilizing circuitry which allows the regulator to be
stable with an output capacitor whose ESR is as low as 4
m
. It may also be possible to use a film capacitor at the
output, but this type is not as attractive for reasons of size
and cost.
Important:
The output capacitor must maintain its ESR in
the stable region over the full operating temperature range of
the application to assure stability. The minimum required
amount of output capacitance is 2.2 μF. Output capacitor
size can be increased without limit. It is important to remem-
ber that capacitor tolerance and variation with temperature
must be taken into consideration when selecting an output
capacitor so that the minimum required amount of output
capacitance is provided over the full operating temperature
range.
LP2967-3.3V Region of Stability with 10 μF C
OUT
10114208
LP2967-3.3V Region of Stability with 4.7 μF C
OUT
10114207
LP2967-2.5V Region Of Stability with 10 μF C
OUT
10114209
LP2967-2.5V Region Of Stability with 4.7 μF C
OUT
10114210
L
www.national.com
13
相關PDF資料 |
PDF描述 |
|---|---|
| LP2967IBP-1825 | Dual Micropower 150 mA Low-Dropout Regulator in micro SMD Package |
| LP2967IBP-1833 | Dual Micropower 150 mA Low-Dropout Regulator in micro SMD Package |
| LP2967IBPX-1825 | Dual Micropower 150 mA Low-Dropout Regulator in micro SMD Package |
| LP2967IBPX-1833 | Dual Micropower 150 mA Low-Dropout Regulator in micro SMD Package |
| LP2967IBPX-2528 | Dual Micropower 150 mA Low-Dropout Regulator in micro SMD Package |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LP2967-2528AUP6 WAF | 制造商:Texas Instruments 功能描述: |
| LP2967-2533AUP6 WAF | 制造商:Texas Instruments 功能描述: |
| LP2967-2626AUP6 WAF | 制造商:Texas Instruments 功能描述: |
| LP2967A-2528 WAF | 制造商:Texas Instruments 功能描述: |
| LP2967A-2533 WAF | 制造商:Texas Instruments 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。