Copyright 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT58.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Standard Bins for LP6-PBL-03-N (I
F
= 3 x 50 mA)
Lamps are sorted to luminous intensity (I
V
) and chromaticity coordiates (x,y) bins shown.
Orders for LP6-PBL1-03-N1 may be filled with any or all bins contained as below.
All luminous intensity (I
V
) and chromaticity coordinates (x,y) values shown and specified are at I
F
= 3 x 50 mA.
W2 or
above
W1 (J)
V2 (H)
V1 (G)
U2 (F)
Important Notes:
All ranks will be included per delivery; rank ratio will be based on the dice distribution.
Tolerance of measurement of luminous intensity is ±10%.
Tolerance of measurement of dominant wavelength is ±1 nm.
Tolerance of measurement of V
is ±0.05 V.
Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu
-
ment.
Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
1.
2.
3.
4.
5.
6.
7.
460 nm
480 nm
Dominant Wavelength (λ
D
)
L
V
)
1400 mcd
(3.5 lm)
1120 mcd
(3.0 lm)
900 mcd
(2.5 lm)
710 mcd
(2.0 lm)
560 mcd
(1.5 lm)