- 您現在的位置：買賣IC網 > PDF目錄44987 > LT3782IFE#TR (LINEAR TECHNOLOGY CORP) 4 A SWITCHING CONTROLLER, 533 kHz SWITCHING FREQ-MAX, PDSO28 PDF資料下載
參數資料
| 型號： | LT3782IFE#TR |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | 穩壓器 |
| 英文描述： | 4 A SWITCHING CONTROLLER, 533 kHz SWITCHING FREQ-MAX, PDSO28 |
| 封裝： | 4.40 MM, PLASTIC, TSSOP-28 |
| 文件頁數： | 2/20頁 |
| 文件大?。?/td> | 223K |
| 代理商： | LT3782IFE#TR |
LT3782
10
3782fg
then RFREQ1 + RFREQ2 should be 80k and VDELAY should
be 1V, with VRSET = 2.3V then RFREQ1 = 47.5k and RFREQ2
= 32.5k (see Figure 3).
Duty Cycle Limit
When DCL pin is shorted to RSET pin and switching fre-
quency is less than 250kHz (RFREQ > 80k), the maximum
duty cycle of LT3782 will be at least 90%. The maximum
duty cycle can be clamped to 50% by grounding the DCL
pin or to 75% by forcing the VDCL voltage to 1.2V with a
resistor divider from RSET pin to ground. The typical DCL
pin input current is 0.2μA.
Slope Compensation
The LT3782 is designed for high voltage and/or high
current applications, and very often these applications
generate noise spikes that can be picked up by the cur-
rent sensing amplier and cause switching jitter. To avoid
switching jitter, careful layout is absolutely necessary to
minimize the current sensing noise pickup. Sometimes
increasing slope compensation to overcome the noise
can help to reduce jitter. The built-in slope compensa-
tion can be increased by adding a resistor RSLOPE from
SLOPE pin to ground. Note that smaller RSLOPE increases
slope compensation and the minimum RSLOPE allowed is
RFREQ/2.
Layout Considerations
To prevent EMI, the power MOSFETs and input bypass
capacitor leads should be kept as short as possible. A
ground plane should be used under the switching circuitry
to prevent interplane coupling and to act as a thermal
spreading path. Note that the bottom pad of the package
is the heat sink, as well as the IC signal ground, and must
be soldered to the ground plane.
In a boost converter, the conversion gain (assuming 100%
efciency) is calculated as (ignoring the forward voltage
drop of the boost diode):
V
OUT
V
IN
=
1
D
where D is the duty ratio of the main switch. D can then
be estimated from the input and output voltages:
D
=1
V
IN
V
OUT
;D
MAX = 1
V
IN(MIN)
V
OUT
Figure 3. Increase Delay Time
RSET
DELAY
LT3782
RFREQ2
32.5k
RFREQ1
47.5k
3782 F03
APPLICATIONS INFORMATION
相關PDF資料 |
PDF描述 |
|---|---|
| LT3782IFE | 4 A SWITCHING CONTROLLER, 533 kHz SWITCHING FREQ-MAX, PDSO28 |
| LT3837IFE#PBF | SWITCHING CONTROLLER, 110 kHz SWITCHING FREQ-MAX, PDSO16 |
| LT3837IFE#TRPBF | SWITCHING CONTROLLER, 110 kHz SWITCHING FREQ-MAX, PDSO16 |
| LT3845AMPFE#TRPBF | SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDSO16 |
| LT3845AIFE#TRPBF | SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDSO16 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LT3782IFE-TRPBF | 制造商:LINER 制造商全稱:Linear Technology 功能描述:2-Phase Step-UP DC/DC Controller |
| LT3791 | 制造商:LINER 制造商全稱:Linear Technology 功能描述:60V 4-Switch Synchronous |
| LT3791-1 | 制造商:LINER 制造商全稱:Linear Technology 功能描述:40VIN LED Converter with Internal PWM Generator Wide VIN Range: 4.5V to 40V |
| LT3791EFE#PBF | 功能描述:IC LED DRVR CONTROL 38TSSOP RoHS:是 類別:集成電路 (IC) >> PMIC - LED 驅動器 系列:True Color PWM™ 標準包裝:60 系列:- 恒定電流:- 恒定電壓:- 拓撲:線性（LDO），PWM，升壓（升壓） 輸出數:8 內部驅動器:是 類型 - 主要:背光 類型 - 次要:RGB，白色 LED 頻率:500kHz ~ 1.5MHz 電源電壓:4.75 V ~ 26 V 輸出電壓:45V 安裝類型:* 封裝/外殼:* 供應商設備封裝:* 包裝:* 工作溫度:-40°C ~ 85°C |
| LT3791EFE#TRPBF | 功能描述:IC LED DRVR CONTROL 38TSSOP RoHS:是 類別:集成電路 (IC) >> PMIC - LED 驅動器 系列:True Color PWM™ 標準包裝:6,000 系列:- 恒定電流:- 恒定電壓:- 拓撲:開路漏極，PWM 輸出數:4 內部驅動器:是 類型 - 主要:LED 閃爍器 類型 - 次要:- 頻率:400kHz 電源電壓:2.3 V ~ 5.5 V 輸出電壓:- 安裝類型:表面貼裝 封裝/外殼:8-VFDFN 裸露焊盤 供應商設備封裝:8-HVSON 包裝:帶卷 (TR) 工作溫度:-40°C ~ 85°C 其它名稱:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND |
發布緊急采購，3分鐘左右您將得到回復。