參數資料
型號: LT5503EFE
廠商: LINEAR TECHNOLOGY CORP
元件分類: 衰減器
英文描述: 1.2GHz to 2.7GHz Direct IQ Modulator and Mixer
中文描述: 1200 MHz - 2700 MHz RF/MICROWAVE I/Q MODULATOR
封裝: PLASTIC, TSSOP-20
文件頁數: 13/20頁
文件大小: 210K
代理商: LT5503EFE
LT5503
13
APPLICATIOU
W
U
U
The LT5503 consists of a direct quadrature modulator and
a mixer. The mixer operates over the range of 1.7GHz to
2.7GHz, and the modulator operates with an output range
of 1.2GHz to 2.7GHz. The LT5503 is designed specifically
for high accuracy digital modulation with supply voltages
as low as 1.8V. It is suitable for IEEE 802.11b wireless local
area network (WLAN), MMDS and wireless local loop
(WLL) transmitters.
A dual-conversion RF system requires two local oscilla-
tors to convert signals between the baseband and RF
domains (see Figure 3). The LT5503’s double-balanced
mixer can be used to generate the LT5503 modulator’s
high frequency carrier input (MODRFIN) by mixing the
systems 1st and 2nd local oscillators (LO1 and LO2). In
this case, a bandpass filter is required to select the desired
mixer output for the modulator input. The mixer’s RF
differential output produces –12dBm typically at 2.45GHz
and the modulator MODIN pin requires
–16dBm, driven
single-ended. This allows approximately 4dB margin for
Figure 3. Example System Block Diagram for a Dual Conversion System
5503 F03
90
°
0
°
0
°
90
°
÷
2
÷
1
÷
2
1ST LO
2ND LO
D/A
D/A
A/D
A/D
LT5502
LT5503
LNA
I
I
Q
Q
VGA
bandpass filter loss. The balanced output from the modu-
lator is applied to a variable gain amplifier (VGA) that
provides a single-ended output. Note that the modulator
can also be used independently of the mixer, freeing the
mixer to be used anywhere in the system. In this case,
MODRFIN will be driven from an external frequency source.
Modulator Baseband
The baseband I and Q inputs (BI
+
/BI
and BQ
+
/BQ
) are
internally biased to 1.4V to maximize the input signal
range at low supply voltage. This bias voltage is stable over
temperature, and increases by approximately 50mV at the
maximum supply voltage. The modulator I and Q inputs
have very wide bandwidth (120MHz typical), making the
LT5503 suitable for even the most wideband modulation
applications. For best carrier suppression and lowest
distortion, differential input drive should be used. Single-
ended drive is possible too, with the unused inputs AC-
coupled to ground.
相關PDF資料
PDF描述
LT5503 1.2GHz to 2.7GHz Direct IQ Modulator and Mixer
LT5512EUF 1kHz-3GHz High Signal Level Down-Converting Mixer
LT5512 1kHz-3GHz High Signal Level Down-Converting Mixer
LT5514 Ultralow Distortion IF Amplifier/ADC Driver with Digitally Controlled Gain
LT5514EFE Ultralow Distortion IF Amplifier/ADC Driver with Digitally Controlled Gain
相關代理商/技術參數
參數描述
LT5503EFE#PBF 功能描述:IC DIRECT IQ MOD/MIXER 20-TSSOP RoHS:是 類別:RF/IF 和 RFID >> RF 調制器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 功能:調制器 LO 頻率:700MHz ~ 2.3GHz RF 頻率:700MHz ~ 2.3GHz P1dB:1dBm 底噪:-148dBm/Hz 輸出功率:-1dBm 電流 - 電源:46mA 電源電壓:2.7 V ~ 3.6 V 測試頻率:1.75GHz 封裝/外殼:28-WFQFN 裸露焊盤 包裝:帶卷 (TR)
LT5503EFE#TR 功能描述:IC DIRECT IQ MOD/MIXER 20-TSSOP RoHS:否 類別:RF/IF 和 RFID >> RF 調制器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 功能:調制器 LO 頻率:700MHz ~ 2.3GHz RF 頻率:700MHz ~ 2.3GHz P1dB:1dBm 底噪:-148dBm/Hz 輸出功率:-1dBm 電流 - 電源:46mA 電源電壓:2.7 V ~ 3.6 V 測試頻率:1.75GHz 封裝/外殼:28-WFQFN 裸露焊盤 包裝:帶卷 (TR)
LT5503EFE#TRPBF 功能描述:IC DIRECT IQ MOD/MIXER 20-TSSOP RoHS:是 類別:RF/IF 和 RFID >> RF 調制器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 功能:調制器 LO 頻率:700MHz ~ 2.3GHz RF 頻率:700MHz ~ 2.3GHz P1dB:1dBm 底噪:-148dBm/Hz 輸出功率:-1dBm 電流 - 電源:46mA 電源電壓:2.7 V ~ 3.6 V 測試頻率:1.75GHz 封裝/外殼:28-WFQFN 裸露焊盤 包裝:帶卷 (TR)
LT5503EFE-PBF 制造商:LINER 制造商全稱:Linear Technology 功能描述:1.2GHz to 2.7GHz Direct IQ Modulator and Mixer
LT5503EFE-TRPBF 制造商:LINER 制造商全稱:Linear Technology 功能描述:1.2GHz to 2.7GHz Direct IQ Modulator and Mixer