- 您現在的位置：買賣IC網 > PDF目錄377738 > LTC1279ISW (LINEAR TECHNOLOGY CORP) 12-Bit, 600ksps Sampling A/D Converter with Shutdown PDF資料下載
參數資料
| 型號： | LTC1279ISW |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | ADC |
| 英文描述： | 12-Bit, 600ksps Sampling A/D Converter with Shutdown |
| 中文描述： | 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDSO24 |
| 封裝： | 0.300 INCH, PLASTIC, SO-24 |
| 文件頁數： | 14/16頁 |
| 文件大?。?/td> | 327K |
| 代理商： | LTC1279ISW |
14
LTC1279
U
S
A
Timing and Control
Conversion start and data read operations are controlled
by three digital inputs: CS, CONVST and RD. Figure 11
shows the logic structure associated with these inputs. A
logic “0” for CONVST will start a conversion after the ADC
has been selected (i.e., CS is low). Once initiated, it cannot
be restarted until the conversion is complete. Converter
status is indicated by the BUSY output, and this is low
while conversion is in progress.
Figures 12 through 16 show several different modes of
operation. In modes 1a and 1b (Figures 12 and 13) CS and
RD are both tied low. The falling CONVST starts the
conversion. The data outputs are always enabled and data
can be latched with the BUSY rising edge. Mode 1a shows
operation with a narrow logic low CONVST pulse. Mode 1b
shows a narrow logic high CONVST pulse.
In mode 2 (Figure 14) CS is tied low. The falling CONVST
signal again starts the conversion. Data outputs are in
three-state until read by MPU with the RD signal. Mode 2
can be used for operation with a shared MPU databus.
O
PPLICATI
U
U
Figure 12. Mode 1a. CONVST Starts a Conversion. Data Ouputs Always Enabled. (CONVST = )
SAMPLE N
DATA (N – 1)
DB11 TO DB0
CS = RD = 0
CONVST
BUSY
1279 F12
t
4
t
CONV
t
5
t
6
DATA N
DB11 TO DB0
DATA (N + 1)
DB11 TO DB0
DATA
SAMPLE N + 1
Figure 11. Internal Logic for Control Inputs CS, RD, CONVST and SHDN
CONVERSION
START (RISING
EDGE TRIGGER)
1279 F11
BUSY
FLIP
FLOP
CLEAR
Q
D
ACTIVE HIGH
ENABLE THREE-STATE OUTPUTS
DB11....DB0
CS
RD
CONVST
SHDN
In Slow memory and ROM modes (Figures 15 and 16) CS
is tied low and CONVST and RD are tied together. The MPU
starts conversion and reads the output with the RD signal.
Conversions are started by the MPU or DSP (no external
sample clock).
In Slow memory mode the processor applies a logic low
to RD (= CONVST), starting the conversion. BUSY goes
low, forcing the processor into a WAIT state. The previous
conversion result appears on the data outputs. When the
conversion is complete, the new conversion results
appear on the data outputs; BUSY goes high, releasing the
processor; the processor applies a logic high to RD
(= CONVST) and reads the new conversion data.
In ROM mode, the processor applies a logic low to RD
(= CONVST), starting a conversion and reading the previ-
ous conversion result. After the conversion is complete,
the processor can read the new result (which will initiate
another conversion).
相關PDF資料 |
PDF描述 |
|---|---|
| LTC1279CSW | 12-Bit, 600ksps Sampling A/D Converter with Shutdown |
| LTC1279I | 12-Bit, 600ksps Sampling A/D Converter with Shutdown |
| LTC1279 | 12-Bit, 600ksps，Sampling A/D Converters with Shutdown(600ksps，12位采樣A/D轉換器（帶關斷）) |
| LTC1282AC | 3V 140ksps 12-Bit Sampling A/D Converter with Reference |
| LTC1282ACN | 3V 140ksps 12-Bit Sampling A/D Converter with Reference |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC1279ISW#PBF | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1279ISW#TR | 功能描述:IC ADC 12BIT SAMPL SHTDWN 24SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1279ISW#TRPBF | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:12 采樣率（每秒）:3M 數據接口:- 轉換器數目:- 功率耗散（最大）:- 電壓電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-23-6 包裝:帶卷 (TR) 輸入數目和類型:- |
| LTC1282ACN | 功能描述:IC A/D CONV SAMPLING W/REF 24DIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1282ACN#PBF | 功能描述:IC A/D CONV SAMPLING W/REF 24DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:12 采樣率（每秒）:3M 數據接口:- 轉換器數目:- 功率耗散（最大）:- 電壓電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-23-6 包裝:帶卷 (TR) 輸入數目和類型:- |
發布緊急采購，3分鐘左右您將得到回復。