- 您現在的位置：買賣IC網 > PDF目錄377740 > LTC1291CIN8 (LINEAR TECHNOLOGY CORP) Single Chip 12-Bit Data Acquisition System PDF資料下載
參數資料
| 型號： | LTC1291CIN8 |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | ADC |
| 英文描述： | Single Chip 12-Bit Data Acquisition System |
| 中文描述： | 2-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDIP8 |
| 封裝： | PLASTIC, DIP-8 |
| 文件頁數： | 17/20頁 |
| 文件大?。?/td> | 376K |
| 代理商： | LTC1291CIN8 |
17
LTC1291
Figure 12. RC Input Filtering
Input Leakage Current
Input leakage currents also can create errors if the source
resistance gets too large. For example, the maximum input
leakage specification of 1
μ
A (at 125
°
C) flowing through a
source resistance of 1k will cause a voltage drop of 1mV
or 0.8LSB. This error will be much reduced at lower
temperatures because leakage drops rapidly (see typical
performance characteristics curve Input Channel Leakage
Current vs Temperature).
SAMPLE-AND-HOLD
Single-Ended Input
The LTC1291 provides a built-in sample-and-hold (S/H)
function on the +IN input for signals acquired in the single-
ended mode (–IN pin grounded). The sample-and-hold
U
S
A
RC Input Filtering
It is possible to filter the inputs with an RC network as
shown in Figure 12. For large values of C
F
(e.g., 1
μ
F) the
capacitive input switching currents are averaged into a net
DC current. A filter should be chosen with a small resistor
and a large capacitor to prevent DC drops across the
resistor. The magnitude of the DC current is approximately
I
DC
= 100pF
×
V
IN
/t
CYC
and is roughly proportional to V
IN
.
When running at the minimum cycle time of 18.5
μ
s, the
input current equals 27
μ
A at V
IN
= 5V. Here a filter resistor
of 4.5
will cause 0.1LSB of full-scale error. If a large filter
resistor must be used, errors can be reduced by increasing
the cycle time as shown in the typical performance
characteristics curve Maximum Filter Resistor vs Cycle
Time.
O
PPLICATI
U
U
R
FILTER
V
IN
–
C
FILTER
LTC1291 F12
LTC1291
“+”
“–”
I
DC
allows the LTC1291 to convert rapidly varying signals (see
typical performance characteristics curve of S/H Acquisition
Time vs Source Resistance). The input voltage is sampled
during the t
SMPL
time as shown in Figure 9. The sampling
interval begins as the bit preceding the MSBF bit is shifted
in and continues until the falling edge of the PS bit is
received. On this falling edge the S/H goes into the hold
mode and the conversion begins.
Differential Input
With a differential input the A/D no longer converts a single
voltage but converts the difference between two voltages.
The voltage on the +IN pin is sampled and held and can be
rapidly time varying. The voltage on the –IN pin must
remain constant and be free of noise and ripple throughout
the conversion time. Otherwise the differencing operation
will not be done accurately. The conversion time is 12 CLK
cycles. Therefore a change in the –IN input voltage during
this interval can cause conversion errors. For a sinusoidal
voltage on the –IN input this error would be:
V
2 f
V
12
f
CLK
ERROR MAX
IN
PEAK
(
)
(
)
=
(
)
Where f
(–IN)
is the frequency of the –IN input voltage,
V
PEAK
is its peak amplitude and f
CLK
is the frequency of the
CLK. Usually V
ERROR
will not be significant. For a 60Hz
signal on the –IN input to generate a 0.25LSB error
(300
μ
V) with the converter running at CLK = 1MHz, its
peak value would have to be 66mV. Rearranging the above
equation the maximum sinusoidal signal that can be
digitized to a given accuracy is given as:
f
V
2 V
f
12
IN
ERROR MAX
PEAK
CLK
(
)
(
)
=
For 0.25LSB error (300
μ
V) the maximum input sinusoid
with a 5V peak amplitude that can be digitized is 0.8Hz.
相關PDF資料 |
PDF描述 |
|---|---|
| LTC1291CMJ8 | Single Chip 12-Bit Data Acquisition System |
| LTC1293CCN | Single Chip 12-Bit Data Acquisition System |
| LTC1293BIN | Single Chip 12-Bit Data Acquisition System |
| LTC1293CIJ | PRINTER, DYMO, LABELMANAGER LM 450; Colour, background:blue |
| LTC1293DMJ | Computer Keyboard |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC1291DCN8 | 功能描述:IC DATA ACQ SYSTEM 12BIT 8-DIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
| LTC1291DCN8#PBF | 功能描述:IC DATA ACQ SYSTEM 12BIT 8-DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Data Converter Basics 標準包裝:1 系列:- 類型:電機控制 分辨率（位）:12 b 采樣率（每秒）:1M 數據接口:串行，并聯 電壓電源:單電源 電源電壓:2.7 V ~ 3.6 V，4.5 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:100-TQFP 供應商設備封裝:100-TQFP（14x14） 包裝:剪切帶 (CT) 其它名稱:296-18373-1 |
| LTC1291DMJ8/883 | 制造商:Linear Technology 功能描述:ADC Single SAR 54ksps 12-bit Serial 8-Pin CDIP 制造商:Linear Technology 功能描述:Single ADC SAR 54ksps 12-bit Serial 8-Pin CDIP |
| LTC1292BCJ8 | 制造商:Linear Technology 功能描述:ADC Single SAR 60ksps 12-bit Serial 8-Pin CDIP |
| LTC1292BCN8 | 功能描述:IC DATA ACQ SYSTEM 12BIT 8-DIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
發布緊急采購，3分鐘左右您將得到回復。