- 您現在的位置：買賣IC網 > PDF目錄10214 > LTC1603IG (Linear Technology)IC CONV A/D 16BIT 250KSPS 36SSOP PDF資料下載
參數資料
| 型號： | LTC1603IG |
| 廠商： | Linear Technology |
| 文件頁數： | 4/20頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC CONV A/D 16BIT 250KSPS 36SSOP |
| 標準包裝： | 37 |
| 位數： | 16 |
| 采樣率（每秒）： | 250k |
| 數據接口： | 并聯 |
| 轉換器數目： | 1 |
| 功率耗散（最大）： | 350mW |
| 電壓電源： | 模擬和數字，雙 ± |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 36-SSOP（0.209"，5.30mm 寬） |
| 供應商設備封裝： | 36-SSOP |
| 包裝： | 管件 |
| 輸入數目和類型： | 2 個單端，雙極；1 個差分，雙極 |
12
LTC1603
1603f
APPLICATIONS INFORMATION
WU
U
starts (settling time must be 200ns for full throughput
rate).
Choosing an Input Amplifier
Choosing an input amplifier is easy if a few requirements
are taken into consideration. First, to limit the magnitude
of the voltage spike seen by the amplifier from charging
the sampling capacitor, choose an amplifier that has a
low output impedance (< 100
) at the closed-loop band-
width frequency. For example, if an amplifier is used in a
gain of +1 and has a unity-gain bandwidth of 50MHz, then
the output impedance at 50MHz should be less than
100
. The second requirement is that the closed-loop
bandwidth must be greater than 15MHz to ensure
adequate small-signal settling for full throughput rate. If
slower op amps are used, more settling time can be
provided by increasing the time between conversions.
The best choice for an op amp to drive the LTC1603 will
depend on the application. Generally applications fall into
two categories: AC applications where dynamic specifi-
cations are most critical and time domain applications
where DC accuracy and settling time are most critical.
The following list is a summary of the op amps that are
suitable for driving the LTC1603. More detailed informa-
tion is available in the Linear Technology databooks, the
LinearView
TM CD-ROM and on our web site at:
www.linear-tech. com.
Figure 10. tACQ vs Source Resistance
LT
1007: Low Noise Precision Amplifier. 2.7mA supply
current,
±5V to ±15V supplies, gain bandwidth product
8MHz, DC applications.
LT1097: Low Cost, Low Power Precision Amplifier. 300
A
supply current,
±5V to ±15V supplies, gain bandwidth
product 0.7MHz, DC applications.
LT1227: 140MHz Video Current Feedback Amplifier. 10mA
supply current,
±5V to ±15V supplies, low noise and low
distortion.
LT1360: 37MHz Voltage Feedback Amplifier. 3.8mA sup-
ply current,
±5V to ±15V supplies, good AC/DC specs.
LT1363: 50MHz Voltage Feedback Amplifier. 6.3mA sup-
ply current, good AC/DC specs.
LT1364/LT1365: Dual and Quad 50MHz Voltage Feedback
Amplifiers. 6.3mA supply current per amplifier, good AC/
DC specs.
Input Filtering
The noise and the distortion of the input amplifier and
other circuitry must be considered since they will add to
the LTC1603 noise and distortion. The small-signal band-
width of the sample-and-hold circuit is 15MHz. Any noise
or distortion products that are present at the analog inputs
will be summed over this entire bandwidth. Noisy input
circuitry should be filtered prior to the analog inputs to
minimize noise. A simple 1-pole RC filter is sufficient for
many applications. For example, Figure 11 shows a 3000pF
capacitor from AIN+ to ground and a 100 source resistor
to limit the input bandwidth to 530kHz. The 3000pF
capacitor also acts as a charge reservoir for the input
sample-and-hold and isolates the ADC input from sam-
pling glitch sensitive circuitry. High quality capacitors and
resistors should be used since these components can add
distortion. NPO and silver mica type dielectric capacitors
have excellent linearity. Carbon surface mount resistors can
also generate distortion from self heating and from damage
that may occur during soldering. Metal film surface mount
resistors are much less susceptible to both problems.
LinearView is a trademark of Linear Technology Corporation.
SOURCE RESISTANCE (
)
1
10
100
1k
10k
ACQUISITION
TIME
(
s)
10
1
0.1
0.01
1603 F10
相關PDF資料 |
PDF描述 |
|---|---|
| VI-2NL-CU-F2 | CONVERTER MOD DC/DC 28V 200W |
| VI-B2P-MW-F4 | CONVERTER MOD DC/DC 13.8V 100W |
| LTC1275BCSW#TRPBF | IC A/D CONV 12BIT SAMPLNG 24SOIC |
| VI-B2P-MW-F3 | CONVERTER MOD DC/DC 13.8V 100W |
| MS27508E20B39P | CONN RCPT 39POS BOX MNT W/PINS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC1603IG#PBF | 功能描述:IC ADC W/SHUTDOWN 16BIT 36-SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1603IG#TR | 功能描述:IC CONV A/D 16BIT 250KSPS 36SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1603IG#TRPBF | 功能描述:IC ADC W/SHUTDOWN 16BIT 36-SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC1604ACG | 功能描述:IC A/D CONV 16BIT SAMPLNG 36SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極 |
| LTC1604ACG#PBF | 功能描述:IC A/D CONV 16BIT SAMPLNG 36SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極 |
發布緊急采購，3分鐘左右您將得到回復。