參數資料
型號： LTC2494IUHF#PBF
廠商： Linear Technology
文件頁數： 10/38頁
文件大?。?/td> 0K
描述： IC ADC 16BIT W/PGA 38-QFN
標準包裝： 52
位數： 16
采樣率（每秒）： 15
數據接口： MICROWIRE?，串行，SPI?
轉換器數目： 1
功率耗散（最大）： 480µW
電壓電源： 單電源
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 38-WFQFN 裸露焊盤
供應商設備封裝： 38-QFN（5x7）
包裝： 管件
輸入數目和類型： 16 個單端，雙極；8 個差分，雙極
產品目錄頁面： 1348 (CN2011-ZH PDF)
配用： DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2494
2494fd
applications inForMation
INPUT DATA FORMAT
The LTC2494 serial input word is 16 bits long and contains
two distinct sets of data. The first set (SGL, ODD, A2, A1,
A0) is used to select the input channel. The second set of
data (IM, FA, FB, SPD, GS2, GS1, GS0) is used to select
the frequency rejection, speed mode (1x, 2x), temperature
measurement and gain.
After power-up, the device initiates an internal reset cycle
whichsetstheinputchanneltoCH0–CH1(IN+=CH0,IN–=
CH1),thefrequencyrejectiontosimultaneous50Hz/60Hz,
1xoutputrate(auto-calibrationenabled),andgain=1.The
firstconversionautomaticallybeginsatpower-upusingthis
default configuration. Once the conversion is complete, a
new word may be written into the device.
The first three bits shifted into the device consist of two
preamble bits and an enable bit. These bits are used to
enable the device configuration and input channel selec-
tion. Valid settings for these three bits are 000, 100 and
101. Other combinations should be avoided. If the first
three bits are 000 or 100, the following data is ignored
(don’t care) and the previously selected input channel and
configuration remain valid for the next conversion.
If the first three bits shifted into the device are 101, then
the next five bits select the input channel for the next
conversion cycle (see Table 3).
The first input bit following the 101 sequence (SGL) de-
termines if the input selection is differential (SGL = 0) or
single-ended(SGL=1).ForSGL=0,twoadjacentchannels
canbeselectedtoformadifferentialinput.ForSGL=1,one
of16channelsisselectedasthepositiveinput.Thenegative
inputisCOMforallsingle-endedoperations.Theremaining
4bits(ODD,A2,A1,A0)determinewhichchannel(s)is/are
selected and the polarity (for a differential input).
The next serial input bit immediately following the input
channel selection is the enable bit for the conversion
configuration (EN2). If this bit is set to 0, then the next
conversion is performed using the previously selected
converter configuration. This is useful in systems using
the same rejection/speed for all input channels and for
backwardcompatibilitywiththeLTC2418/LTC2414families
of delta-sigma ADCs.
The second set of configuration data can be loaded into the
device by setting EN2 = 1 (see Table 4). The first bit (IM)
is used to select the internal temperature sensor. If IM = 1,
the following conversion will be performed on the internal
temperaturesensorratherthantheselectedinputchannel.
The next 2 bits (FA and FB) are used to set the rejection
frequency. The next bit (SPD) is used to select either the
1x output rate if SPD = 0 (auto-calibration is enabled and
the offset is continuously calibrated and removed from
the final conversion result) or the 2x output rate if SPD
Table 2. LTC2494 Output Data Format
DIFFERENTIAL INPUT VOLTAGE
VIN*
BIT 23
EOC
BIT 22
DMY
BIT 21
SIG
BIT 20
MSB
BIT 19
BIT 18
BIT 17
…
BIT 4
BITS 3 TO 0
VIN* ≥ FS**
0
1
0
…
0
0000
FS** – 1LSB
0
1
0
1
…
1
0000
0.5 FS**
0
1
0
1
0
…
0
0000
0.5 FS** – 1LSB
0
1
0
1
…
1
0000
0
1/0***
0
…
0
0000
–1LSB
0
1
…
1
0000
–0.5 FS**
0
1
0
…
0
0000
–0.5 FS** – 1LSB
0
1
0
1
…
1
0000
–FS**
0
1
0
…
0
0000
VIN* < –FS**
0
1
…
1
0000
*The differential input voltage VIN = IN+ – IN–. **The full-scale voltage FS = 0.5 VREF/Gain.
***The sign bit changes state during the 0 output code when the device is operating in the 2x speed mode.
相關PDF資料
PDF描述
VE-272-IX-B1 CONVERTER MOD DC/DC 15V 75W
VI-JWJ-MY-F4 CONVERTER MOD DC/DC 36V 50W
LT1017IS8 IC COMPARATOR MICRPWR DUAL 8SOIC
AD7321BRUZ IC ADC 12BIT+ SAR 2CHAN 14TSSOP
AD7914BRUZ IC ADC 10BIT 4CH 1MSPS 16TSSOP
相關代理商/技術參數
參數描述
LTC2495CUHF 制造商:Linear Technology 功能描述:ADC Single Delta-Sigma 15sps 16-bit Serial 38-Pin QFN EP
LTC2495CUHF#PBF 功能描述:IC ADC 16BIT W/PGA 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率（每秒）:45k 數據接口:串行 轉換器數目:2 功率耗散（最大）:315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端，單極
LTC2495CUHF#TRPBF 功能描述:IC ADC 16BIT W/PGA 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2495IUHF#PBF 功能描述:IC ADC 16BIT W/PGA 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率（每秒）:1M 數據接口:串行，SPI? 轉換器數目:1 功率耗散（最大）:- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤（4x4） 包裝:Digi-Reel® 輸入數目和類型:8 個單端，單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6
LTC2495IUHF#TRPBF 功能描述:IC ADC 16BIT W/PGA 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率（每秒）:45k 數據接口:串行 轉換器數目:2 功率耗散（最大）:315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端，單極
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*