RCOM (Pin 1): Center Tap Point of R
參數資料
型號： LTC2751AIUHF-16#PBF
廠商： Linear Technology
文件頁數： 22/22頁
文件大?。?/td> 0K
描述： IC DAC 16BIT CUR OUT 38-QFN
產品培訓模塊： LTC275x 18-Bit DAC
標準包裝： 52
系列： SoftSpan™
設置時間： 2µs
位數： 16
數據接口： 并聯
轉換器數目： 1
電壓電源： 單電源
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 38-WFQFN 裸露焊盤
供應商設備封裝： 38-QFN（5x7）
包裝： 管件
輸出數目和類型： 2 電流，單極；2 電流，雙極
采樣率（每秒）： *
配用： DC1110A-ND - BOARD DAC LTC2751-16
LTC2751
9
2751fa
pin FuncTions
RCOM (Pin 1): Center Tap Point of RIN and REF. Normally
tied to the negative input of the external reference invert-
ing amplifier.
RIN(Pin2):InputResistorforExternalReferenceInverting
Amplifier. Normally tied to the external reference voltage
VREFandtoROFS(Pin37).Typically5V;acceptsupto±15V.
S2 (Pin 3): Span I/O Bit 2. Pins S0, S1 and S2 are used
to program and to read back the output range of the DAC.
IOUT2 (Pin 4): DAC Current Output Complement. Tie IOUT2
to GND.
NC (Pin 5): No Connection. Must be tied to GND, provides
necessary shielding for IOUT2.
D3-D11(Pins6-14):LTC2751-12 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D11 is the MSB.
D5-D13(Pins6-14):LTC2751-14 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D13 is the MSB.
D7-D15(Pins6-14):LTC2751-16 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D15 is the MSB.
VDD (Pin 15): Positive Supply Input 2.7V ≤ VDD ≤ 5.5V.
Requires a 0.1F bypass capacitor to GND.
GND (Pin 16): Ground. Tie to ground.
CLR (Pin 17): Asynchronous Clear. When CLR is taken
to a logic low, the data registers are reset to the zero-volt
code for the present output range (VOUT = 0V).
MSPAN(Pin18):ManualSpanControlPin.MSPANisused
to configure the LTC2751 for operation in a single, fixed
output range. When configured for single-span operation,
the output range is set via hardware pin strapping. The
span input and DAC registers are transparent and do not
respond to write or update commands.
To configure the part for single-span use, tie MSPAN
directly to VDD. If MSPAN is instead connected to GND
(SoftSpan configuration), the output ranges are set and
verified by using write, update and read operations. See
Manual Span Configuration in the Operation section.
MSPAN must be connected either directly to GND (Soft-
Span configuration) or VDD (single-span configuration).
D0-D2(Pins19-21):LTC2751-12 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D0 is the LSB.
D0-D4(Pins19-23):LTC2751-14 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D0 is the LSB.
D0-D6(Pins19-25):LTC2751-16 Only.DACInput/Output
Data Bits. These I/O pins set and read back the DAC code.
D0 is the LSB.
NC (Pins 22-27): LTC2751-12 Only. No Connection.
NC (Pins 24-27): LTC2751-14 Only. No Connection.
NC (Pins 26, 27): LTC2751-16 Only. No Connection.
D/S (Pin 28): Data/Span Select. This pin is used to select
activation of the data or span I/O pins (D0 to D15 or S0
to S2, respectively), along with their respective dedicated
registers, for write or read operations. Update operations
ignore D/S, since all updates affect both data and span
registers. For single-span operation, tie D/S to GND.
READ(Pin29):ReadPin.WhenREADisassertedhigh,the
data I/O pins (D0-D15) or span I/O pins (S0-S2) output the
contents of the selected register (see Table 1). For single-
span operation, readback of the span I/O pins is disabled.
UPD (Pin 30): Update and Buffer Select Pin. When READ
is held low and UPD is asserted high, the contents of the
input registers (both data and span) are copied into their
respectiveDACregisters.TheoutputoftheDACisupdated,
reflecting the new DAC register values.
When READ is held high, the update function is disabled
and the UPD pin functions as a buffer selector—logic low
to select the input register, high for the DAC register. See
Readback in the Operation section.
WR (Pin 31): Active Low Write Pin. A Write operation
copies the data present on the data or span I/O pins (D0-
D15 or S0-S2, respectively) into the input register. When
READ is high, the Write function is disabled.
S0 (Pin 32): Span I/O Bit 0. Pins S0, S1 and S2 are used
to program and to read back the output range of the DAC.
相關PDF資料
PDF描述
LTC2752ACLX#PBF IC DAC 16BIT DUAL CUR OUT 48LQFP
LTC2753AIUK-16#TRPBF IC DAC 16BIT DUAL 48-QFN
LTC2754AIUKG-16#PBF IC DAC 16BIT QUAD IOUT 52-QFN
LTC2755AIUP-16#PBF IC DAC 16BIT CUR OUT 64-QFN
LTC2757ACLX#PBF IC DAC 18BIT PAR 48LQFP
相關代理商/技術參數
參數描述
LTC2751BCUHF-16#PBF 功能描述:IC DAC 16BIT CUR OUT 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:SoftSpan™ 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流，單極；1 電流，雙極 采樣率（每秒）:*
LTC2751BCUHF-16#TRPBF 功能描述:IC DAC 16BIT CUR OUT 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:SoftSpan™ 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流，單極；1 電流，雙極 采樣率（每秒）:*
LTC2751BIUHF-16#PBF 功能描述:IC DAC 16BIT CUR OUT 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:SoftSpan™ 產品培訓模塊:Data Converter Fundamentals DAC Architectures 標準包裝:750 系列:- 設置時間:7µs 位數:16 數據接口:并聯 轉換器數目:1 電壓電源:雙 ± 功率耗散（最大）:100mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-LCC（J 形引線） 供應商設備封裝:28-PLCC（11.51x11.51） 包裝:帶卷 (TR) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:143k
LTC2751BIUHF-16#TRPBF 功能描述:IC DAC 16BIT CUR OUT 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:SoftSpan™ 產品培訓模塊:Data Converter Fundamentals DAC Architectures 標準包裝:750 系列:- 設置時間:7µs 位數:16 數據接口:并聯 轉換器數目:1 電壓電源:雙 ± 功率耗散（最大）:100mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-LCC（J 形引線） 供應商設備封裝:28-PLCC（11.51x11.51） 包裝:帶卷 (TR) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:143k
LTC2751CUHF-12#PBF 功能描述:IC DAC 12BIT CUR OUT 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:SoftSpan™ 產品培訓模塊:LTC263x 12-, 10-, and 8-Bit VOUT DAC Family 特色產品:LTC2636 - Octal 12-/10-/8-Bit SPI VOUT DACs with 10ppm/°C Reference 標準包裝:91 系列:- 設置時間:4µs 位數:10 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:8 電壓電源:單電源 功率耗散（最大）:2.7mW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-WFDFN 裸露焊盤 供應商設備封裝:14-DFN-EP（4x3） 包裝:管件 輸出數目和類型:8 電壓，單極 采樣率（每秒）:*
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*