- 您現在的位置：買賣IC網 > PDF目錄8616 > LTC6360IDD#PBF (Linear Technology)IC ADC DRIVER TRUE ZERO 8DFN PDF資料下載
參數資料
| 型號： | LTC6360IDD#PBF |
| 廠商： | Linear Technology |
| 文件頁數： | 6/24頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC ADC DRIVER TRUE ZERO 8DFN |
| 標準包裝： | 121 |
| 類型： | ADC 驅動器 |
| 應用： | 數據采集 |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-WFDFN 裸露焊盤 |
| 供應商設備封裝： | 8-DFN（3x3） |
| 包裝： | 管件 |
LTC6360
14
6360f
applicaTions inForMaTion
The charge pump is capable of sinking up to 4.5mA of
DC current with a typical DC output impedance of 30Ω. If
more current is demanded of the charge pump, the volt-
age at CPO will collapse towards 0V. A diode connected
from CPO to GND limits the CPO node from being pulled
above ground by more than one diode drop.
Transient currents are absorbed by the filter capacitors
from CPO/CPI to GND. Care should be taken in selecting
the filter capacitors such that there is minimum ripple
voltage and droop during peak transient current demand.
Using multiple small surface mount capacitors is ad-
vised, with each capacitor covering a portion of the total
frequency range.
Slew Rate and Full Power Bandwidth
Additional consideration needs to be paid to the current
demanded of the charge pump. When driving a capaci-
tive load, the LTC6360 will exhibit a clipped distortion
characteristic at a lower frequency than where slew rate
limited distortion would occur. In contrast to a traditional
amplifier, where the full power bandwidth is determined
from the amplifier’s slew rate, when driving capacitive
loads, the full power bandwidth of the LTC6360 will be
limited by the charge pump sinking capability.
Theaveragecurrentsunkbythechargepumpwhendriving
a capacitive load can be approximated as:
ICP(AVG) = 2VP CFILT f + 1mA
(1)
where VP and f are the amplitude and frequency of the
driven signal respectively.
Themaximumfrequencythatthechargepumpcansupport
while maintaining the CPO pin below –0.4V is:
fFPBW = (ICP(MAX) – 1mA)/(2VP CFILT)
(2)
whereICP(MAX)isgiveninthespecificationtable.Full-scale
signals beyond this frequency will cause the charge pump
to collapse towards 0V, limiting the output amplitude and
causing distortion.
Output Compensation
The LTC6360 is internally compensated to be gain of 5
stable. Lower gains require an external RC network at
the output to provide compensation. The amplifier has
been decompensated to provide the highest possible
gain-bandwidth with a typical RC load of 10Ω in series
with 330pF. The extra gain-bandwidth obtained serves to
reducedistortionoverawiderbandwidth.Sinceanexternal
RC filter network is desired in most ADC applications, the
decompensationistransparentinthesecasesandactually
serves to improve distortion performance.
The RC network at the output contributes a pole-zero pair
that reduces the loop gain above the pole frequency. The
simplified circuit model at high frequencies is shown in
Figure 7. At high frequencies, the open-loop output imped-
ance of the amplifier can be represented by an equivalent
resistor, ro, of 45Ω.
The pole frequency is:
fP = 1/(2π(RFILT + ro)CFILT)
(3)
The zero frequency is:
fZ = 1/(2πRFILTCFILT)
(4)
which is also the –3dB bandwidth of the filter formed by
RFILT and CFILT. The zero-pole ratio is given by:
fZ/fP = 1 + ro/RFILT
(5)
Figure 7. Pole-Zero Introduced by RC Network at Output
6360 F07
TO FEEDBACK
NETWORK
AMPLIFIER
fZ = 1/[2πRFILTCFILT]
f
ρ = 1/[2π(RFILT + ro)CFILT]
OUT
RFILT
CFILT
ro
VO
+
–
相關PDF資料 |
PDF描述 |
|---|---|
| VE-B5H-MX-S | CONVERTER MOD DC/DC 52V 75W |
| LTC6360IMS8E#PBF | IC ADC DRIVER TRUE ZERO 8MSOP |
| VE-B5D-MX-S | CONVERTER MOD DC/DC 85V 75W |
| AD8138AARMZ-RL | IC ADC DRIVER DIFF 8MSOP |
| VE-B5B-MX-S | CONVERTER MOD DC/DC 95V 75W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC6360IMS8E#PBF | 功能描述:IC ADC DRIVER TRUE ZERO 8MSOP RoHS:是 類別:集成電路 (IC) >> 線性 - 放大器 - 專用 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:60 系列:- 類型:可變增益放大器 應用:CATV 安裝類型:表面貼裝 封裝/外殼:20-WQFN 裸露焊盤 供應商設備封裝:20-TQFN-EP（5x5） 包裝:托盤 |
| LTC6360IMS8E#TRPBF | 功能描述:IC ADC DRIVER TRUE ZERO 8MSOP RoHS:是 類別:集成電路 (IC) >> 線性 - 放大器 - 專用 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:60 系列:- 類型:可變增益放大器 應用:CATV 安裝類型:表面貼裝 封裝/外殼:20-WQFN 裸露焊盤 供應商設備封裝:20-TQFN-EP（5x5） 包裝:托盤 |
| LTC6362 | 制造商:LINER 制造商全稱:Linear Technology 功能描述:Precision, Low Power Rail-to-Rail Input/Output |
| LTC6362CDD#PBF | 功能描述:IC OPAMP DIFFERENTIAL R-R 8DFN RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:1,000 系列:- 放大器類型:電壓反饋 電路數:4 輸出類型:滿擺幅 轉換速率:33 V/µs 增益帶寬積:20MHz -3db帶寬:30MHz 電流 - 輸入偏壓:2nA 電壓 - 輸入偏移:3000µV 電流 - 電源:2.5mA 電流 - 輸出 / 通道:30mA 電壓 - 電源，單路/雙路(±):4.5 V ~ 16.5 V，±2.25 V ~ 8.25 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:14-SOIC 包裝:帶卷 (TR) |
| LTC6362CDD#TRPBF | 功能描述:IC OPAMP DIFFERENTIAL R-R 8DFN RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:1,000 系列:- 放大器類型:電壓反饋 電路數:4 輸出類型:滿擺幅 轉換速率:33 V/µs 增益帶寬積:20MHz -3db帶寬:30MHz 電流 - 輸入偏壓:2nA 電壓 - 輸入偏移:3000µV 電流 - 電源:2.5mA 電流 - 輸出 / 通道:30mA 電壓 - 電源，單路/雙路(±):4.5 V ~ 16.5 V，±2.25 V ~ 8.25 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:14-SOIC 包裝:帶卷 (TR) |
發布緊急采購，3分鐘左右您將得到回復。