- 您現在的位置：買賣IC網 > PDF目錄358956 > LTD104C11S (Toshiba Corporation) 26CM COLOUR TFT LCD MODULE PDF資料下載
參數資料
| 型號： | LTD104C11S |
| 廠商： | Toshiba Corporation |
| 英文描述： | 26CM COLOUR TFT LCD MODULE |
| 中文描述： | 26厘米彩色TFT液晶顯示模塊 |
| 文件頁數： | 9/9頁 |
| 文件大?。?/td> | 131K |
| 代理商： | LTD104C11S |
(9/
9
) 2003-11-27 (Ver.0.4R)
LTD104C11S
FOR SAFETY
LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions.
In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions detailed
in Engineering Information No.EE-N001,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA LCD MODULES".
Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical
information.
1) SPECIAL PURPOSES
A) Toshiba Matsushita Display Technology's Standard LCD Modules have not been customized for operation in extreme
environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic.
B) Since Toshiba Matsushita Display Technology's Standard LCD Modules have not been designed for operation in extreme
environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which
exceed Toshiba Matsushita Display Technology's published specification limits.
C) In addition, since Toshiba Matsushita Display Technology Standard LCD Modules have not been designed for use in
applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft
navigation control systems (such as, but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military
defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear
energy), or in critical medical device or patient life-support systems.
2) DISASSEMBLING OR MODIFICATION
DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause
scratches or dust on the display.
Toshiba Matsushita Display Technology doses not warrant the module, if customer disassembled or modified it.
3) BREAKAGE OF LCD PANEL
DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if LCD
panel is broken and liquid crystal material spills out.
If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately.
If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
4) GLASS OF LCD PANEL
BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken.
5) ELECTRIC SHOCK
DISCONNECT POWER SUPPLY before handling LCD module.
DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric
shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on.
6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT
DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage
variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may be
damaged.
Employ protection circuit for power supply, whenever the specification or TD specifies it.
Suitable protection circuit should be applied for each system design.
7) RECOMMENDED OPERATION CONDITIONS
The performance and quality of the LCD panel are warranted only when the LCD panel is used within “the recommended
operation conditions”. Toshiba Matsushita Display Technology Co., Ltd. never warrants the performance and quality of the
LCD panel when you use the LCD panel over “the recommended operation conditions”, although within “the absolute
maximum rating”.
To use the LCD panel over “the recommended operation conditions” may have bad influence on the characteristics and
reliability of the LCD panel and may shorten the life of the LCD panel.
Therefore, when designing the whole set, not to be over “the recommended operation conditions”, you should fully take care of
supply voltage change, characteristic of connection parts, serge of input-and-output line, and surrounding temperature.
8)
DISPOSAL
When dispose LCD module, obey to the applicable environmental regulations.
!
相關PDF資料 |
PDF描述 |
|---|---|
| LTDL-RX16P04 | High speed transmission (16 Mbps , NRZ code) |
| LTE-2871 | GaAlAs T-1 3/4 Modified Infrared Emitting Diode |
| LTE-302 | SELECTED TO SPECIFIC ON-LIVE INTENSITY AND RADIANT INTENSITY RANGES |
| LTE-3271T | GaAlAs T-1 3/4 Standard 5 Infrared Emitting Diode |
| LTE-3271TL | GaAlAs T-1 3/4 Standard 5 Infrared Emitting Diode |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTD104C11S-OF | 制造商:AIS 功能描述:OPEN FRAME SOLUTION FOR LTD104C11S - Bulk |
| LTD104C11S-OF-TACTILETOUCH | 制造商:AIS 功能描述:OPEN FRAME W/FUJITSU TCH(USB)IMMERSION TECH TACTILE FEEDBACK - Bulk |
| LTD104KA1S-OF | 制造商:AIS 功能描述:AIS OPEN FRAME - Bulk |
| LTD11-22 | 制造商:Thomas & Betts 功能描述: |
| LTD121C30S | 制造商:Toshiba America Electronic Components 功能描述:LCD DISPLAY SVGA 800X600 |
發布緊急采購，3分鐘左右您將得到回復。