E
PDM Molded Rubber Deadfront Construction
Specially designed fuse elements with built-in
low and high current interrupting capability
Current-limiting protection. Fault clearing occurs
in less than one half cycle
Modular construction with a center replaceable fuse
section and interchangeable end fittings
Compact
304 stainless steel brackets and hold down straps available
Fully sealed and submersible
Light weight
Insulate, shield and eliminate exposed live parts
Full-Range fault current protection through 50kA
Limits the system available fault current and dramatically
reduces stresses on equipment
Allow elbow connection or direct attachment
to equipment mounted bushings
Flexibility of installation on junctions, transformers,
cable runs, taps
Suitable for padmount, subsurface or vault installations
Accommodate a wide variety of mounting arrangements
F
1
PG-PC-0506
Thomas & Betts Corporation 8155 T&B Boulevard Memphis TN 38125 800.888.0211 www.tnb.com
Molded Current-Limiting Fuse
Molded Current-Limiting Fuses
provide full-
range fault current protection using specially
designed fuse elements, rated through 23kV line
to ground and 50kA interrupting current.
Construction is modular with a center replaceable
fuse section and interchangeable end fittings
for elbow connection or direct attachment to
equipment mounted bushings. The various end
fittings allow fuses to be applied throughout
the system including switchgear, junctions,
transformers, cable runs and taps.
Elastimold
Molded Current-Limiting Fuses are
available in:
80 thru 180 Amp ratings for applications on
5kV systems (see Table 1)
6 thru 115 Amp ratings for applications on
8.7/15kV grounded Wye systems (see Table 1)
6 thru 100 Amp ratings for applications on
15/25kV grounded Wye systems (see Table 1)
6 thru 50 Amp ratings for applications on
20/35kV grounded Wye systems (see Table 1)
FEATURE
bENEFIT/DESCRIPTION