Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 Phone: 888.373.6767 www.baneng.com Email: sensors@baneng.com
EZ-BEAM M18 Series Sensors
WARRANTY:
Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!
Aperture Kits for M18 Series Opposed-Mode Sensors
AP18SC
Kit includes round apertures of:
0.5 mm (0.02"), 1.0 mm (0.04") &
2.5 mm (0.10") in diameter
NOTE: Aperture adds 3/16" to sensor length.
Aperture styles available
Round
Rectangular
Aperture
(Rectangular type shown)
Lens
Housing
12.7 mm
(0.50")
O-ring (2)
22.4 mm
(0.88")
Outside Diameter
Aperture kits are available for M18 Series opposed-mode sensors. Apertures are used to narrow and/or shape the sensor’s effective beam for
use in specialized applications.
AP18SR
Kit includes rectangular apertures of:
0.5 mm (0.02"), 1.0 mm (0.04") &
2.5 mm (0.10") wide
Each kit also includes a thread-on
aperture housing, a Teflon FEP
and two 0-rings
lens
Model
Description