![](http://datasheet.mmic.net.cn/110000/M35502AFP_datasheet_3496202/M35502AFP_10.png)
10
MITSUBISHI LINEAR IC’s
M35502AFP
FLD CONTROLLER
ΣIOH(peak)
ΣIOH(avg)
IOH(peak)
IOL(peak)
IOH(avg)
IOL(avg)
f(OSC)
f(SCLK)
VCC
VSS
VEE
VIH
VIL
VCC
VEE
VI
VO
Pd
Topr
Tstg
Power source voltage
Pull-down power source voltage
Input voltage
AN0 – AN3
Input voltage
__
CS, SDATA, SCLK
Output voltage
FLD0 – FLD24
Output voltage
SDATA
Power dissipation
Operating temperature
Storage temperature
Ratings
–0.3 to 6.5
VCC–45 to VCC+0.3
–0.3 to VCC+0.3
VCC–45 to VCC+0.3
VCC–50 to VCC+0.3
–0.3 to VCC+0.3
600
–20 to 85
–40 to 125
V
mW
°C
All voltage are based on VSS.
Output transistors are cut off.
Conditions
Parameter
Symbol
Unit
Power source voltage
Pull-down power source voltage
“H” input voltage
__
CS, SCLK, SDATA
“L” input voltage
__
CS, SCLK, SDATA
Limits
Min.
4.0
VCC–38
0.75VCC
0
Typ.
5.0
0
Max.
5.5
VCC
0.25VCC
V
Parameter
Symbol
Unit
“H” total peak output current
FLD0 – FLD24
(Note 1)
“H” total average output current FLD0 – FLD24
“H” peak output current
FLD0 – FLD24 (at DIG selecting)
(Note 2)
“H” peak output current
FLD0 – FLD24 (at SEG selecting)
(Note 2)
“L” peak output current
SDATA
“H” peak output current
FLD0 – FLD24 (at DIG selecting)
(Note 3)
“H” average output current
FLD0 – FLD24 (at SEG selecting)
(Note 3)
“L” average output current
SDATA
Clock input oscillation frequency
(Note 4)
Serial I/O external clock frequency
Limits
Min.
Typ.
2.0
250
Max.
–240
–120
–40
–20
10
–18
–7
5.0
2.6
mA
MHz
kHz
RECOMMENDED OPERATING CONDITIONS (VCC = 4.0 to 5.5 V, Ta = –20 to 85 °C, unless otherwise noted)
Parameter
Symbol
Unit
Notes 1: The total output current is the sum of all the currents flowing through all the applicable ports. The total average current is an average
value measured over 100 ms. The total peak current is the peak value of all the currents.
2: The peak output current is the peak current flowing in each port.
3: The average output current is an average value measured over 100 ms.
4: When the oscillation frequency has a 50 % duty cycle.
A waveform: 450
s or more
frequency and 30
s or less
pulse width.
Connect only capacitor load
(CL = 200pF).
All voltage are based on VSS.
Output transistors are cut off.
Ta = 25 °C
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS (VCC = 4.0 to 5.5 V, Ta = –20 to 85 °C, unless otherwise noted)
1.4