參數資料
型號: M37207MF-XXXSP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP64
封裝: 0.750 INCH, 1.78 MM PITCH, PLASTIC, DIP-64
文件頁數: 91/121頁
文件大小: 1907K
代理商: M37207MF-XXXSP
MITSUBISHI MICROCOMPUTERS
M37207MF-XXXSP/FP, M37207M8-XXXSP
M37207EFSP/FP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER
and ON-SCREEN DISPLAY CONTROLLER
71
Fig. 68. CRT Clock Selection Register
(13) Clock for Display
As a clock for display to be used for CRT display, it is possible to
select one of the following 3 types.
Main clock supplied from the XIN pin
Clock from the LC or RC supplied from the pins OSC1 and OSC2.
Clock from the ceramic resonator or quartz-crystal oscillator sup-
plied from the pins OSC1 and OSC2.
This clock for display can be selected for each block by the CRT
clock selection register (address 020916).
When selecting the main clock, set the oscillation frequency to
8 MHz.
b7 b6 b5 b4 b3 b2 b1 b0
CRT clock selection register (OP) [Address 020916]
B
Name
Functions
After reset R W
CRT Clock Selection Register
0, 1 CRT clock
selection bits
(OP0, OP1)
0
Since the main clock is used as the clock for
display, the oscillation frequency is limited.
Because of this, the character size in width
(horizontal) direction is also limited. In this
case, pins OSC1 and OSC2 are also used
as input ports P70 and P71 respectively.
The clock for display is supplied by connecting the
following across the pins OSC1 and OSC2.
a ceramic resonator only for CRT display and a feedback resistor
a quartz-crystal oscillator only for CRT display and a feedback
resistor (See note)
2
to
6
0
b1
The clock for display is supplied by connecting RC
or LC across the pins OSC1 and OSC2.
Functions
10
b0
CRT oscillation
frequency
= f(XIN)
Notes 1: It is necessary to connect other ceramic resonator or quartz-crystal oscillator across the pins XIN and XOUT.
2: CC6 is the scnanning line double count mode flag.
0
1
11
RW
R—
CC6
CC6 =
“0” or “1”
CC6 = “0”
1
0
Do not set.
7
0
Fix this bits to “0.”
RW
Nothing is assigned. These bits are write disable bits.
When these bits are read out, the values are “0.”
相關PDF資料
PDF描述
M37210M3-XXXFP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PQFP64
M37210E4-XXXSP 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37210E4FP 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PQFP64
M37210M3-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37210E4SP 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP52
相關代理商/技術參數
參數描述
M3720-8 制造商:未知廠家 制造商全稱:未知廠家 功能描述:1 KEY 1 SOUND
M3720-9 制造商:未知廠家 制造商全稱:未知廠家 功能描述:1 KEY 1 SOUND
M37210E4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
M37210E4-801FP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
M37210E4FP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER