參數資料
型號: M37225M8
廠商: Mitsubishi Electric Corporation
英文描述: SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
中文描述: 單芯片8位CMOS微機電壓合成與屏幕顯示控制器
文件頁數: 88/133頁
文件大?。?/td> 1610K
代理商: M37225M8
88
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER
with ON-SCREEN DISPLAY CONTROLLER
M37225M6–XXXSP, M37225M8–XXXSP
M37225ECSP
MITSUBISHI MICROCOMPUTERS
Rev. 1.0
RESET
Vss
Vcc
Circuit example 1
RESET
Vss
Vcc
Circuit example 2
Note :
Make the level change from “L” to “H” at the point at
which the power source voltage exceeds the specified
voltage.
8.14 DISPLAY OSCILLATION CIRCUIT
The OSD oscillation circuit has a built-in clock oscillation circuits, so
that a clock for OSD can be obtained simply by connecting an LC, a
ceramic resonator, or a quartz-crystal oscillator across the pins OSC1
and OSC2. Which of the sub-clock or the OSD oscillation circuit is
selected by setting bits 0 and 1 of the interrupt input polarity register
(address 00CD
16
).
8.16 ADDRESSING MODE
The memory access is reinforced with 17 kinds of addressing modes.
Refer to SERIES 740 <Software> User’s Manual for details.
8.17 MACHINE INSTRUCTIONS
There are 71 machine instructions. Refer to SERIES 740 <Soft- ware>
User’s Manual for details.
9. PROGRAMMING NOTES
The divide ratio of the timer is 1/(n+1).
Even though the BBC and BBS instructions are executed imme-
diately after the interrupt request bits are modified (by the pro-
gram), those instructions are only valid for the contents before
the modification. At least one instruction cycle is needed (such as
an NOP) between the modification of the interrupt request bits
and the execution of the BBC and BBS instructions.
After the ADC and SBC instructions are executed (in the decimal
mode), one instruction cycle (such as an NOP) is needed before
the SEC, CLC, or CLD instruction is executed.
An NOP instruction is needed immediately after the execution of
a PLP instruction.
In order to avoid noise and latch-up, connect a bypass capacitor
(
0.1
μ
F) directly between the V
CC
pin–V
SS
pin, AV
CC
pin–V
SS
pin, and the V
CC
pin–CNV
SS
pin, using a thick wire.
Fig.8.14.1 Display Oscillation Circuit
8.15 AUTO-CLEAR CIRCUIT
When a power source is supplied, the auto-clear function will oper-
ate by connecting the following circuit to the RESET pin.
Fig.8.15.1 Auto-clear Circuit Example
OSC2
OSC1
L
C1
C2
相關PDF資料
PDF描述
M37702M4AXXXFP SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37702M4BXXXFP SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37702S4AFP SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37702S4BFP SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M3819 8-Bit Single Chip Microcomputer(8位單片微控制器)
相關代理商/技術參數
參數描述
M37225MA 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SNGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
M372429100 制造商:ITW Switches 功能描述:IN-RUSH
M372429200 制造商:ITW Switches 功能描述:IN-RUSH
M372499100 制造商:ITW Switches 功能描述:IN-RUSH
M372499200 制造商:ITW Switches 功能描述:HIGH IN-RUSH MINI ROCKER