參數資料
型號： M38207E8GP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP80
封裝： 0.65 MM PITCH, PLASTIC, QFP-80
文件頁數： 18/67頁
文件大?。?/td> 1099K
代理商： M38207E8GP
24
MITSUBISHI MICROCOMPUTERS
3820 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
Timer 1, Timer 2, Timer 3
Timer 1, timer 2, and timer 3 are 8-bit timers. The count source for
each timer can be selected by timer 123 mode register. The timer
latch value is not affected by a change of the count source. How-
ever, because changing the count source may cause an inadvert-
ent count down of the timer. Therefore, rewrite the value of timer
whenever the count source is changed.
Timer 2 Write Control
If the timer 2 write control bit is “0”, when the value is written in the
address of timer 2, the value is loaded in the timer 2 and the latch
at the same time.
If the timer 2 write control bit is “1”, when the value is written in the
address of timer 2, the value is loaded only in the latch. The value
in the latch is loaded in timer 2 after timer 2 underflows.
Timer 2 Output Control
When the timer 2 (TOUT) is output enabled, an inversion signal
from pin TOUT is output each time timer 2 underflows.
In this case, set the port P56 shared with the port TOUT to the out-
put mode.
Note on Timer 1 to Timer 3
When the count source of timer 1 to 3 is changed, the timer count-
ing value may be changed large because a thin pulse is generated
in count input of timer. If timer 1 output is selected as the count
source of timer 2 or timer 3, when timer 1 is written, the counting
value of timer 2 or timer 3 may be changed large because a thin
pulse is generated in timer 1 output.
Therefore, set the value of timer in the order of timer 1, timer 2 and
timer 3 after the count source selection of timer 1 to 3.
Fig. 14 Structure of timer 123 mode register
TOUT output active edge switch bit
0 : Start at "H" output
1 : Start at "L" output
TOUT output control bit
0 : TOUT output disabled
1 : TOUT output enabled
Timer 2 write control bit
0 : Write value in latch and counter
1 : Write value in latch only
Timer 2 count source selection bit
0 : Timer 1 underflow
1 : f(XIN)/16
(Middle-/high-speed mode)
f(XCIN)/16
(Low-speed mode)(Note)
Timer 3 count source selection bit
0 : Timer 1 underflow
1 : f(XIN)/16
(Middle-/high-speed mode)
f(XCIN)/16
(Low-speed mode)(Note)
Timer 1 count source selection bit
0 : f(XIN)/16
(Middle-/high-speed mode)
f(XCIN)/16
(Low-speed mode)(Note)
1 : f(XCIN)
Not used (return "0" when read)
Timer 123 mode register
(T123M :address 002916)
7
Note : Internal clock
φ is f (XCIN)/2 in the low-speed mode.
0
相關PDF資料
PDF描述
M38203M4DXXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP80
M38203E4GP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP80
M38207E8-XXXFP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP80
M38203M4-XXXHP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP80
M38203M2LXXXHP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
M38207E8HP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38207M8 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38207M8-051 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER
M38207M8-107HP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER
M38207M8-117HP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*