參數資料
型號: M38259EFGP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP100
封裝: 14 X 14 MM, 0.50 MM PITCH, PLASTIC, LQFP-100
文件頁數: 59/73頁
文件大?。?/td> 1323K
代理商: M38259EFGP
Rev.2.02
Jun 19, 2007
page 60 of 73
REJ03B0146-0202
3823 Group
Countermeasures against noise
(1) Shortest wiring length
Wiring for RESET pin
Make the length of wiring which is connected to the RESET pin
as short as possible. Especially, connect a capacitor across the
RESET pin and the VSS pin with the shortest possible wiring
(within 20mm).
● Reason
The width of a pulse input into the RESET pin is determined by
the timing necessary conditions. If noise having a shorter pulse
width than the standard is input to the RESET pin, the reset is
released before the internal state of the microcomputer is com-
pletely initialized. This may cause a program runaway.
(2) Connection of bypass capacitor across VSS line and VCC line
In order to stabilize the system operation and avoid the latch-up,
connect an approximately 0.1 F bypass capacitor across the VSS
line and the VCC line as follows:
Connect a bypass capacitor across the VSS pin and the VCC pin
at equal length.
Connect a bypass capacitor across the VSS pin and the VCC pin
with the shortest possible wiring.
Use lines with a larger diameter than other signal lines for VSS
line and VCC line.
Connect the power source wiring via a bypass capacitor to the
VSS pin and the VCC pin.
Wiring for clock input/output pins
Make the length of wiring which is connected to clock I/O pins
as short as possible.
Make the length of wiring (within 20 mm) across the grounding
lead of a capacitor which is connected to an oscillator and the
VSS pin of a microcomputer as short as possible.
Separate the VSS pattern only for oscillation from other VSS
patterns.
● Reason
If noise enters clock I/O pins, clock waveforms may be de-
formed. This may cause a program failure or program runaway.
Also, if a potential difference is caused by the noise between
the VSS level of a microcomputer and the VSS level of an oscil-
lator, the correct clock will not be input in the microcomputer.
RESET
Reset
circuit
Noise
VSS
Reset
circuit
VSS
RESET
VSS
N.G.
O.K.
Noise
XIN
XOUT
VSS
XIN
XOUT
VSS
N.G.
O.K.
VSS
VCC
VSS
VCC
N.G.
O.K.
Fig. 63 Wiring for clock I/O pins
Fig. 62 Wiring for the RESET pin
Fig. 64 Bypass capacitor across the VSS line and the VCC line
相關PDF資料
PDF描述
M38257E8FP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PQFP100
M38259EFFS 8-BIT, UVPROM, 4 MHz, MICROCONTROLLER, CQCC100
M38254M6DXXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP100
M38258MCDXXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP100
M38257M8-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M3826 功能描述:電纜固定件和配件 LTRSCG 1000 BLACK RoHS:否 制造商:Heyco 類型:Cable Grips, Liquid Tight 材料:Nylon 顏色:Black 安裝方法:Cable 最大光束直徑:11.4 mm 抗拉強度:
M3826 BK001 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 1000'
M3826 BK002 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 500'
M3826 BK005 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 100'
M3826 BK199 制造商:Alpha Wire Company 功能描述:CBL 2COND 16AWG BLK 3000=3000'