參數資料
型號： M38271E1-XXXFP
廠商： Mitsubishi Electric Corporation
英文描述： Pin header, Discrete wire crimping connection, Discrete wire connectors; HRS No: 686-0043-9 00; Connector Type: Wire; Contact Gender: Female; Termination Style: Crimping; Current Rating(Amps)(Max.): 0.9; Contact Mating Area Plating: Gold; Operating Temperature Range (degrees C): -35 to 85; General Description: Female contact
中文描述： 單芯片8位CMOS微機
文件頁數： 24/70頁
文件大小： 1112K
代理商： M38271E1-XXXFP
24
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
3827 Group
MITSUBISHI MICROCOMPUTERS
Timer 1, Timer 2, Timer 3
Timer 1, timer 2, and timer 3 are 8-bit timers. The count source for
each timer can be selected by timer 123 mode register. The timer
latch value is not affected by a change of the count source. How-
ever, because changing the count source may cause an
inadvertent count down of the timer. Therefore, rewrite the value of
timer whenever the count source is changed.
G
Timer 2 write control
If the timer 2 write control bit is “0”, when the value is written in the
address of timer 2, the value is loaded in the timer 2 and the latch
at the same time.
If the timer 2 write control bit is “1”, when the value is written in the
address of timer 2, the value is loaded only in the latch. The value
in the latch is loaded in timer 2 after timer 2 underflows.
G
Timer 2 output control
When the timer 2 (T
OUT
) is output enabled, an inversion signal
from the T
OUT
pin is output each time timer 2 underflows.
In this case, set the port shared with the T
OUT
pin to the output.
I
Notes on timer 1 to timer 3
When the count source of timer 1 to 3 is changed, the timer count-
ing value may be changed large because a thin pulse is generated
in count input of timer . If timer 1 output is selected as the count
source of timer 2 or timer 3, when timer 1 is written, the counting
value of timer 2 or timer 3 may be changed large because a thin
pulse is generated in timer 1 output.
Therefore, set the value of timer in the order of timer 1, timer 2 and
timer 3 after the count source selection of timer 1 to 3.
Fig. 20 Structure of timer 123 mode register
T
OUT
output active edge switch bit
0 : Start at “H” output
1 : Start at “L” output
T
OUT
/
φ
output control bit
0 : T
OUT
/
φ
output disabled
1 : T
OUT
/
φ
output enabled
Timer 2 write control bit
0 : Write data in latch and counter
1 : Write data in latch only
Timer 2 count source selection bit
0 : Timer 1 output
1 : f(X
IN
)/16
(or f(X
CIN
)/16 in low-speed mode)
Timer 3 count source selection bit
0 : Timer 1 output
1 : f(X
IN
)/16
(or f(X
CIN
)/16 in low-speed mode)
Timer 1 count source selection bit
0 : f(X
IN
)/16
(or f(X
CIN
)/16 in low-speed mode)
1 : f(X
CIN
)
Not used (return “0” when read)
Timer 123 mode register
(T123M :address 0029
16
)
Note :
Internal clock
φ
is X
CIN
/2 in the low-speed mode.
b7
b0
相關PDF資料
PDF描述
M38271E1-XXXFS SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38271E1-XXXGP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38271E1-XXXHP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38271E1MXXXFP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38271E1MXXXFS SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M3828 BK001 制造商:Alpha Wire Company 功能描述:CBL 3COND 16AWG BLK 1000'
M3828 BK002 制造商:Alpha Wire Company 功能描述:CBL 3COND 16AWG BLK 500'
M3828 BK005 制造商:Alpha Wire Company 功能描述:CBL 3COND 16AWG BLK 100'
M3828 BK199 制造商:Alpha Wire Company 功能描述:CBL 3COND 16AWG BLK 3000=3000'
M3829 BK001 制造商:Alpha Wire Company 功能描述:CBL 4COND 16AWG BLK 1000'
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*