參數資料
型號： M38C24M6-XXXFP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP64
封裝： 14 X 14 MM, 0.80 MM PITCH, PLASTIC, LQFP-64
文件頁數： 24/91頁
文件大?。?/td> 1867K
代理商： M38C24M6-XXXFP
29
38C2 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
Fig. 23 Structure of Timer X, Y related registers
Timer X mode register
(TXM: address 002F16)
Timer X operating mode bits
b2 b1 b0
0 0 0 : Timer mode
0 0 1 : Pulse output mode
0 1 0 : IGBT output mode
0 1 1 : PWM mode
1 0 0 : Event counter mode
1 0 1 : Pulse width measurement mode
Timer X write control bit
0 : Write data to both timer latch and timer
1 : Write data to timer latch only
Timer X count source selection bit
0 : Frequency divider output
1 : f(XCIN)
Data for control of event counter window
0 : Event count enabled
1 : Event count disabled
Timer X count stop bit
0 : Count operation
1 : Count stop
Timer X output selection bit (P35)
0 : I/O port
1 : Timer X output
b7
b0
Timer X control register
(TXCON: address 0FF416)
Noise filter sampling clock selection bit
0 : f(XIN)/2
1 : f(XIN)/4
External trigger delay time selection bits
b2 b1
0 0 : Not delayed
0 1 : (4/f(XIN))
s
1 0 : (8/f(XIN))
s
1 1 : (16/f(XIN))
s
Timer X output control bit 1 (P51)
0 : Not used
1 : INT1 interrupt used
Timer X output control bit 2 (P34)
0 : Not used
1 : INT2 interrupt used
Timer X output edge switch bit
0 : Start at “L” output
1 : Start at “H” output
CNTR0 active edge switch bits
b7 b6
0 0 : Count at rising edge in event counter mode
Falling edge active for CNTR0 interrupt
Measure “H” pulse width in pulse width measurement mode
0 1 : Count at falling edge in event counter mode
Rising edge active for CNTR0 interrupt
Measure “L” pulse width in pulse width measurement mode
1 0 : Count at both edges in event counter mode
Both edges active for CNTR0 interrupt
1 1 : Count at both edges in event counter mode
Both edges active for CNTR0 interrupt
b7
b0
Timer XY frequency division selection register
(PREXY: address 0FF716)
Timer X frequency division selection bits
b2 b1 b0
0 0 0 : 1/16 f(XIN) or 1/16 f(XCIN)
0 0 1 : 1/1 f(XIN) or 1/1 f(XCIN)
0 1 0 : 1/2 f(XIN) or 1/2 f(XCIN)
0 1 1 : 1/32 f(XIN) or 1/32 f(XCIN)
1 0 0 : 1/64 f(XIN) or 1/64 f(XCIN)
1 0 1 : 1/128 f(XIN) or 1/128 f(XCIN)
1 1 0 : 1/256 f(XIN) or 1/256 f(XCIN)
1 1 1 : 1/1024 f(XIN) or 1/1024 f(XCIN)
Timer Y frequency division selection bits
b5 b4 b3
0 0 0 : 1/16 f(XIN) or 1/16 f(XCIN)
0 0 1 : 1/1 f(XIN) or 1/1 f(XCIN)
0 1 0 : 1/2 f(XIN) or 1/2 f(XCIN)
0 1 1 : 1/32 f(XIN) or 1/32 f(XCIN)
1 0 0 : 1/64 f(XIN) or 1/64 f(XCIN)
1 0 1 : 1/128 f(XIN) or 1/128 f(XCIN)
1 1 0 : 1/256 f(XIN) or 1/256 f(XCIN)
1 1 1 : 1/1024 f(XIN) or 1/1024 f(XCIN)
Not used (returns “0” when read)
b7
b0
Timer Y mode register
(TYM: address 003016)
Real time port control bit
0 : Real time port function invalid
1 : Real time port functin valid
P46 data for real time port
P47 data for real time port
Timer Y count source selection bit
0 : Frequency divider output
1 : f(XCIN)
Timer Y operating mode bits
b5 b4
0 0 : Timer mode
0 1 : Period measurement mode
1 0 : Event counter mode
1 1 : Pulse width HL continuous measurement mode
CNTR1 active edge switch bit
0 : Count at rising edge in event counter mode
Measure falling period in period measurement mode
Falling edge active for CNTR1 interrupt
1 : Count at falling edge in event counter mode
Measure rising period in period measurement mode
Rising edge active for CNTR1 interrupt
Timer Y count stop bit
0 : Count operation
1 : Count stop
b7
b0
Timer Y mode register 2
(TYM2: address 0FFB16)
Timer Y write control bit
0 : Write data to both timer latch and timer
1 : Write data to timer latch only
Not used (returns “0” when read)
b7
b0
相關PDF資料
PDF描述
M38C24M4-XXXHP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP64
M38C24M4-XXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP64
M38C29MC-XXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP64
M38C29MC-XXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP64
M38C29FFFP 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PQFP64
相關代理商/技術參數
參數描述
M38C24M6-XXXHP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38C29FFAFP 制造商:Renesas Electronics Corporation 功能描述:
M38C29FFAFP#U0 功能描述:IC 740/38C2 MCU FLASH 64LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 產品培訓模塊:CAN Basics Part-1 CAN Basics Part-2 Electromagnetic Noise Reduction Techniques Part 1 M16C Product Overview Part 1 M16C Product Overview Part 2 標準包裝:1 系列:M16C™ M32C/80/87 核心處理器:M32C/80 芯體尺寸:16/32-位 速度:32MHz 連通性:EBI/EMI，I²C，IEBus，IrDA，SIO，UART/USART 外圍設備:DMA，POR，PWM，WDT 輸入/輸出數:121 程序存儲器容量:384KB（384K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:24K x 8 電壓 - 電源 (Vcc/Vdd):3 V ~ 5.5 V 數據轉換器:A/D 34x10b，D/A 2x8b 振蕩器型:內部 工作溫度:-20°C ~ 85°C 封裝/外殼:144-LQFP 包裝:托盤 產品目錄頁面:749 (CN2011-ZH PDF) 配用:R0K330879S001BE-ND - KIT DEV RSK M32C/87
M38C29FFAHP 制造商:Renesas Electronics Corporation 功能描述:MCU 3/5V 60K 64-LQFP - Trays
M38C29FFAHP#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 8BIT 740 CISC 60KB FLASH 5V 64LQFP - Trays
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*