North America
Tel: 800.366.2266 / Fax: 978.366.2266
North America
Tel: 800.366.2266 / Fax: 978.366.2266
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1
E-Series RF 2-Way 0° Power Divider
5-1000 MHz
M/A-COMProducts
- Rev. V2
MAPD-009278-5T1000
ADVANCED:
Data Sheets contain information regarding a product M/A-COM is considering for
ADVANCED:
Data Sheets contain information regarding a product MA-COM Technical Solutions is
considering for development. Performance is based on target specifications, simulated results, and/
or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY:
Data Sheets contain information regarding a product MA-COM Technical Solutions
has under development. Performance is based on engineering tests. Specifications are typical.
Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commit-
ment to produce in volume is not guaranteed.
MA-COM Technical Solutions and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice.
Features
2-Way 0 Degree
Surface Mount
Tape and reel packaging available
260°C Reflow Compatible
RoHS* compliant
Description
M/A-COM’s MAPD-009278-5T1000 is a RoHS Compliant 2-way
0 degree RF power divider in a low cost, surface mount
package. Ideally suit for 50Ohm system.
Two 1.5pF capacitors
and one 100Ohm resistor are required with this part.
The MAPD-009278-5T1000 is available in a SM-156 surface
mount package and is designed to be utilized in both RoHS
and standard reflow profiles. Parts are packaged in tape & reel.
Product Image
Absolute Maximum Ratings
Parameter
Absolute Maximum
RF Power
250 mW
DC Current
240 mA
2
Operating Temperature
-40°C to +85°C
Storage Temperature
-55°C to +125°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
Ordering Information
Part Number
Package
MAPD-009278-5T1000
Tape and Reel (2000 piece Reel)
Electrical Specifications: T
A
= 25°C, Z
0
= 50
Ω
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
RF Frequency
—
5 - 1000
MHz
—
—
—
Insertion Loss
Above 3dB
5 - 1000
dB
—
—
1.4
Amplitude Imbalance
—
5 - 1000
dB
—
—
0.6
Phase Imbalance
—
5 - 1000
Degrees
—
—
4
Input Return Loss
—
5 - 1000
dB
—
19
16.0
Output Return Loss
—
5 - 1000
dB
—
25
16.0
Isolation
—
5 - 1000
dB
—
20
16.0
Schematic With Off Chip Components
Pin Configuration
Pin No.
Function
1
Ground
2
External 1.5pF Cap
3
Output Port 1
4
Output Port 2
5
External 1.5pF Cap
6
Input