
MAX4760/MAX4760A/MAX4761/MAX4761A
High-Bandwidth, Quad DPDT Switches
2
_______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V+ = +2.7V to +5.25V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at V+ = 3V, TA = +25°C.) (Notes 2, 3)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
(All voltages referenced to GND.)
V+ .............................................................................-0.3V to +6V
IN_, EN (MAX4761) ..................................................-0.3V to +6V
IN_, EN (MAX4761A) ....................................-0.3V to (V+ + 0.3V)
COM_, NO_, NC_ (Note 1) ...........................-0.3V to (V+ + 0.3V)
Continuous Current
NO_, NC_, COM_ .......................................................±100mA
Peak Current
(pulsed at 1ms, 10% duty cycle)................................±200mA
(pulsed at 1ms, 50% duty cycle)............................... ±300mA
Continuous Power Dissipation (TA = +70°C)
36-Bump UCSP (derate 15.3mW/°C above +70°C).... 1221mW
36-Pin TQFN (derate 26.3mW/°C above +70°C)......... 2105mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................ +300°C
Bump Temperature (soldering)
Infrared (15s) ...............................................................+220°C
Vapor Phase (60s) .......................................................+215°C
Note 1: Signals on NO_, NC_, COM_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum
current rating.
PARAMETER
SYMBOL
CONDITIONS
TA
MIN
TYP
MAX
UNITS
ANALOG SWITCH
Analog Signal Range
VCOM_,
VNO_, VNC_
TMIN to TMAX
0V+
V
+25°C
2.0
3.5
On-Resistance
RON
V+ = 2.7V, ICOM_ = 10mA,
VNC_ or VNO_ = 0V or V+ (Note 4)
TMIN to TMAX
4
Ω
+25°C
0.2
0.4
On-Resistance Match
Between Channels
ΔRON
V+ = 2.7V, ICOM_ = 10mA,
VNO_ or VNC_ = 1.5V (Notes 4, 5)
TMIN to TMAX
0.55
Ω
+25°C
0.8
1.5
On-Resistance Flatness
RFLAT(ON)
V+ = 2.7V, ICOM_= 10mA,
VNC_ or VNO_ = 0V or V+ (Note 6)
TMIN to TMAX
1.8
Ω
+25°C
-5
+5
NO_, NC_ Off-Leakage
Current
INO_(OFF),
INC_(OFF)
V+ = 3.6V;
VCOM_ = 3.3V, 0.3V;
VNO_ or VNC_ = 0.3V, 3.3V
TMIN to TMAX
-25
+25
nA
+25°C
-5
0.1
+5
COM_ Off-Leakage Current
V+ = 3.6V (MAX4761/MAX4761A);
VCOM_ = 3.3V, 0.3V; VNO_ or
VNC_ = 0.3V, 3.3V
TMIN to TMAX
-25
+25
nA
+25°C
-5
+5
COM_ On-Leakage Current
ICOM_(ON)
V+ = 3.6V; VCOM_ = 3.3V, 0.3V; VNO_
or VNC_ = 3.3V, 0.3V or unconnected
TMIN to TMAX
-25
+25
nA
DYNAMIC
+25°C
45
140
MAX4760/
MAX4761
TMIN to TMAX
150
ns
+25°C
400
800
Turn-On Time
tON
VNO_ or VNC_ = 1.5V;
RL = 50
Ω; CL = 35pF,
Figure 2
MAX4760A/
MAX4761A
TMIN to TMAX
800
ns