- 您現在的位置：買賣IC網 > PDF目錄377878 > MB15E05SRPV1 (FUJITSU LTD) Single Serial Input PLL Frequency Synthesizer On-chip 2.0 GHz Prescaler PDF資料下載
參數資料
| 型號： | MB15E05SRPV1 |
| 廠商： | FUJITSU LTD |
| 元件分類： | XO, clock |
| 英文描述： | Single Serial Input PLL Frequency Synthesizer On-chip 2.0 GHz Prescaler |
| 中文描述： | PLL FREQUENCY SYNTHESIZER, 2000 MHz, PBCC16 |
| 封裝： | PLASTIC, BCC-16 |
| 文件頁數： | 12/25頁 |
| 文件大?。?/td> | 132K |
| 代理商： | MB15E05SRPV1 |
MB15E05SR
12
3. Power Saving Mode (Intermittent Mode Control Circuit)
Table 10. PS Pin Setting
The intermittent mode control circuit reduces the PLL power consumption.
By setting the PS pin low, the device enters into the power saving mode, reducing the current consumption. See
the Electrical Characteristics chart for the specific value.
The phase detector output, Do, becomes high impedance.
For the signal PLL, the lock detector, LD, remains high, indicating a locked condition.
Setting the PS pin high, releases the power saving mode, and the device works normally.
The intermittent mode control circuit also ensures a smooth startup when the device returns to normal operation.
When the PLL is returned to normal operation, the phase comparator output signal is unpredictable. This is because
of the unknown relationship between the comparison frequency (fp) and the reference frequency (fr) which can
cause a major change in the comparator output, resulting in a VCO frequency jump and an increase in lockup time.
To prevent a major VCO frequency jump, the intermittent mode control circuit limits the magnitude of the error
signal from the phase detector when it returns to normal operation.
Notes :
When power (V
CC
) is first applied, the device must be in standby mode, PS = Low.
The serial data input after the power supply becomes stable and the the power saving mode is released
after completed the data input..
PS pin
Status
H
Normal mode
L
Power saving mode
ON
OFF
V
CC
Clock
Data
LE
PS
(1)
(2)
(3)
t
V
≥
1
μ
s
t
PS
≥
100 ns
(1) PS = L (power saving mode) at Power ON
(2) Set serial data 1
μ
s later after power supply remains stable (V
CC
>
2.2 V).
(3) Release power saving mode (PS: “L”
→
“H”) 100 ns later after setting serial data.
相關PDF資料 |
PDF描述 |
|---|---|
| MB15E05 | Serial Input PLL Frequency Synthesizer(串行輸入PLL頻率合成器) |
| MB15E06PFV1 | Single Serial Input PLL Frequency Synthesizer On-Chip 2.5 GHz Prescaler |
| MB15E06PV1 | Single Serial Input PLL Frequency Synthesizer On-Chip 2.5 GHz Prescaler |
| MB15E06SR | Single Serial Input PLL Frequency Synthesizer On-chip 3.0 GHz Prescaler |
| MB15E06SRPFT | Single Serial Input PLL Frequency Synthesizer On-chip 3.0 GHz Prescaler |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MB15E06 | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Single Serial Input PLL Frequency Synthesizer On-Chip 2.5 GHz Prescaler |
| MB15E06PFV1 | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Single Serial Input PLL Frequency Synthesizer On-Chip 2.5 GHz Prescaler |
| MB15E06PFV1-G-BNDE1 | 制造商:FUJITSU 功能描述: |
| MB15E06PV1 | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Single Serial Input PLL Frequency Synthesizer On-Chip 2.5 GHz Prescaler |
| MB15E06SR | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Single Serial Input PLL Frequency Synthesizer On-chip 3.0 GHz Prescaler |
發布緊急采購，3分鐘左右您將得到回復。