參數(shù)資料
型號: MB3807APF
廠商: FUJITSU LTD
元件分類: 電源管理
英文描述: Power Management Switching IC (with flash memory power switching function)
中文描述: 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO16
封裝: PLASTIC, SOP-16
文件頁數(shù): 4/15頁
文件大小: 123K
代理商: MB3807APF
4
MB3807A
I
BLOCK DIAGRAM
I
BLOCK DESCRIPTION
The SWIN1 and SWIN2 pins are connected to the 12-V and 3.5/5.0-V power supplies, respectively. The SWOUT
pin is connected to the V
PP
power supply pin of the flash memory.
When conditions, EN1 = “H” and EN0 = “L” are established in an attempt to write data to flash memory, the switch-
on circuit (charge pump) on the SW1 side is activated.
The charge pump applies optimum voltage to the SW1 gate to turn the switch on, causing the SWOUT pin to supply
12-V power from the SWIN1 pin to the V
PP
pin of the flash memory. On the SW2 side, the switch-off circuit discharges
the SW2 gate voltage to the GND to turn the switch off.
Reading data from flash memory assume the conditions EN1 = “L” and EN0 = “H.” When the conditions are
established, the switch-on circuit (charge pump) on the SW2 side and the switch-off circuit on the SW1 side are
activated to cause the SWOUT pin to supply 3.3/5.0-V power from the SWIN2 pin to the V
PP
pin of the flash memory.
Since the switch-on circuits are powered from the SWIN1 and SWIN2 pins, 80 to 350
μ
A current flows from the
SWIN1 and SWIN2 pins to the GND when the switch is turned on.
The back gate of the N-channel MOS is connected to the GND. This prevents reverse current from flowing at switch-
off time, regardless of the high potential of SWIN1 or SWIN2 pin and the SWOUT pin.
The DLY pin is an external capacitance connector to delay turning the switch on. Controlling the switch ON time
minimizes surge current flowing to the capacitor connected to the load when the switch is turned on.
DLY
SWIN1
Power supply
for writing
SWIN2
SWOUT
EN1
EN0
Switch-off circuit
(SW1)
(SW2)
Switch-off circuit
Flash
memory
V
PP
Switch-on circuit
(Charge pump)
Power supply
for reading
Switch-on circuit
(Charge pump)
Note: The MB3807A contains a pair of above circuit blocks.
相關PDF資料
PDF描述
MB3817PFV RADIATION HARDENED HIGH EFFICIENCY, 5 AMP SWITCHING REGULATORS
MB3817 ECONOLINE: REC5-S_DRW(Z)/H4,H6 - Safety standards and approval: EN 60950 certified, rated for 250VAV (LVD test report)- Applied for Ul 1950 Component Recognised Certification- 5W DIP Package- 4kVDC & 6kVDC Isolation- Regulated Output- Continuous Short Circiut Protection Auto-Restarting
MB3821 2-ch DC/DC Converter IC With Synchronous Rectifier
MB3821PFV 2-ch DC/DC Converter IC With Synchronous Rectifier
MB3825A 6-ch DC/DC Converter IC With Synchronous Rectifier
相關代理商/技術參數(shù)
參數(shù)描述
MB3813 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)
MB3813A 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)
MB3813APFV 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Lithium Ion Battery Charger DC/DC Converter IC (High Precision with Constant-current Function)
MB3817 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Switching Regulator Controller
MB3817_03 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Switching Regulator Controller