參數資料
型號： MB90428GCPMC
廠商： FUJITSU LTD
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
封裝： 14 X 14 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LQFP-100
文件頁數： 12/88頁
文件大小： 1991K
代理商： MB90428GCPMC
MB90420G/425G Series
2
DS07-13711-5E
16-bit PPG (3 channels)
Output pins (3) , external trigger input pin (1)
Output clock frequencies : fCP, fCP/22, fCP/24, fCP/26
Delay interrupt
Generates interrupt for task switching.
Interruptions to CPU can be generated/deleted by software setting.
External interrupts (8 channels)
8-channel independent operation
Interrupt source setting available : “L” to “H” edge/ “H” to “L” edge/ “L” level/ “H” level.
A/D converter
10-bit or 8-bit resolution
× 8 channels (input multiplexed)
Conversion time : 6.13
s or less (at fCP = 16 MHz)
External trigger startup available (P50/INT0/ADTG)
Internal timer startup available (16-bit reload timer 1)
UART (2 channels)
Full duplex double buffer type
Supports asynchronous/synchronous transfer (with start/stop bits)
Internal timer can be selected as clock (16-bit reload timer 0)
Asynchronous : 4808 bps, 5208 bps, 9615 bps, 10417 bps, 19230 bps, 38460 bps, 62500 bps, 500000 bps
Synchronous : 500 Kbps, 1Mbps, 2Mbps (at fCP
= 16 MHz)
CAN interface *1
Conforms to CAN specifications version 2.0 Part A and B.
Automatic resend in case of error.
Automatic transfer in response to remote frame.
16 prioritized message buffers for data and messages for data and ID
Multiple message support
Receiving filter has flexible configuration : All bit compare/all bit mask/two partial bit masks
Supports up to 1 Mbps
CAN WAKEUP function (connects RX internally to INT0)
LCD controller/driver (1 channel)
Segment driver and command driver with direct LCD panel (display) drive capability
Low voltage/Program Looping detect reset *2
Automatic reset when low voltage is detected
Program Looping detection function
Stepping motor controller (4 channels)
High current output for all channels
× 4
Synchronized 8/10-bit PWM for all channels
× 2
Sound generator
8-bit PWM signal mixed with tone frequency from 8-bit reload counter.
PWM frequencies : 62.5 kHz, 31.2 kHz, 15.6 kHz, 7.8 kHz (at fCP
= 16MHz)
Tone frequencies : 1/2 PWM frequency, divided by (reload frequency
+1)
Input/output ports
Push-pull output and Schmitt trigger input
Programmable in bit units for input/output or peripheral signals.
(Continued)
相關PDF資料
PDF描述
MB90428GAPMC 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
MB90443GPF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
MB90455SPMT 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
MB90457PMT 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
MB90462PF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP64
相關代理商/技術參數
參數描述
MB90428GPF 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
MB90428GPFV 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
MB90435 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90437L 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90437LPF 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*