參數資料
型號: MB90F342CEPF
廠商: FUJITSU COMPONENT LTD
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
封裝: 14 X 20 MM, 3.35 MM HEIGHT, 0.65 MM PITCH, PLASTIC, QFP-100
文件頁數: 18/85頁
文件大小: 1173K
代理商: MB90F342CEPF
MB90340E Series
25
5.
Sequence for Turning On the Power Supply to the A/D Converter and Analog Inputs
Make sure to turn on the A/D converter power supply (AVCC, AVRH, AVRL) and analog inputs (AN0 to AN23)
after turning-on the digital power supply (VCC).
Turn-off the digital power after turning off the A/D converter supply and analog inputs. In this case, make sure
that the voltage does not exceed AVRH or AVCC (turning on/off the analog and digital power supplies simulta-
neously is acceptable).
6.
Connection of Unused A/D Converter Pins when the A/D Converter is Used
Connect unused pins of A/D converter to AVCC
= VCC, AVSS = AVRH = AVRL = VSS.
7.
Crystal Oscillator Circuit
The X0, X1 pins and X0A, X1A pins may be possible causes of abnormal operation. Make sure to provide bypass
capacitors via the shortest distance from X0, X1 pins and X0A, X1A pins, crystal oscillator (or ceramic oscillator)
and ground lines, and make sure, to the utmost effort, that the oscillation circuit lines do not cross the lines of
other circuits. It is highly recommended to provide a printed circuit board art work surrounding X0, X1 pins and
X0A, X1A pins with a ground area for stabilizing the operation.
For each of the mass-production products, request an oscillator evaluation from the manufacturer of the oscillator
you are using.
8.
Pull-up/down resistors
The MB90340E Series does not support internal pull-up/down resistors (except for the pull-up resistors built into
ports 0 to 3). Use external components where needed.
9.
Using external clock
To use an external clock, drive the X0 pin and leave the X1 pin open.
10. Precautions when not using a sub clock signal
If you do not connect pins X0A and X1A to an oscillator, use pull-down handling on the X0A pin, and leave the
X1A pin open.
11. Notes on operation in PLL clock mode
If PLL clock mode is selected, the microcontroller attempt to be working with the self-oscillating circuit even when
there is no external oscillator or the external clock input is stopped. Performance of this operation, however,
cannot be guaranteed.
12. Notes on Power-On
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during power-on to 50
s
or more (0.2 V to 2.7 V)
13. Stabilization of power supply voltage
A sudden change in the supply voltage may cause the device to malfunction even within the specified VCC supply
voltage operating range. Therefore, the VCC supply voltage should be stabilized.
Stabilize the power supply voltage as follows as a standard level of stabilization.
X0
X1
MB90340E Series
Open
相關PDF資料
PDF描述
MB90F345EPF 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MB90F346EPFV 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MB90F345ESPF 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MB90341CESPF 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP100
MB90F346CASPF 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
MB90F342CESPQC-GSE2 功能描述:IC MCU FLASH 256K ROM 100QFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:F²MC MB90340E 產品培訓模塊:MCU Product Line Introduction XMEGA Introduction AVR XMEGA USB Connectivity 標準包裝:90 系列:AVR® XMEGA 核心處理器:AVR 芯體尺寸:8/16-位 速度:32MHz 連通性:I²C,IrDA,SPI,UART/USART 外圍設備:欠壓檢測/復位,DMA,POR,PWM,WDT 輸入/輸出數:50 程序存儲器容量:192KB(96K x 16) 程序存儲器類型:閃存 EEPROM 大小:4K x 8 RAM 容量:16K x 8 電壓 - 電源 (Vcc/Vdd):1.6 V ~ 3.6 V 數據轉換器:A/D 16x12b; D/A 2x12b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:64-TQFP 包裝:托盤 配用:ATSTK600-RC14-ND - STK600 SOCKET/ADAPTER 64TQFPATSTK600-TQFP64-ND - STK600 SOCKET/ADAPTER 64-TQFPATAVRONEKIT-ND - KIT AVR/AVR32 DEBUGGER/PROGRMMRATAVRISP2-ND - PROGRAMMER AVR IN SYSTEM
MB90F345CAPFR-GSE1 制造商:FUJITSU 功能描述:
MB90F345CAPFR-GS-SPE1 制造商:FUJITSU 功能描述:
MB90F345CAPMC-GSE1 制造商:FUJITSU 功能描述:
MB90F345CASPF-GSE1 制造商:FUJITSU 功能描述:IC 16BIT MCU CAN 5V SMD QFP100