參數資料
型號： MB90F463APMC
廠商： FUJITSU LTD
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP64
封裝： 12 X 12 MM, 1.70 MM HEIGHT, 0.65 MM PITCH, PLASTIC, LFQFP-64
文件頁數： 43/88頁
文件大?。?/td> 2202K
代理商： MB90F463APMC
MB90460/465 Series
48
DS07-13714-2E
8.
Multi-Pulse Generator (Not present in MB90465 series, but the 16-bit reload timer 0 can be
used individually)
The Multi-pulse Generator consists of a 16-bit PPG timer, a 16-bit reload timer and a waveform sequencer. By
using the waveform sequencer, 16-bit PPG timer output signal can be directed to Multi-pulse Generator output
(OPT5 to 0) according to the input signal of Multi-pulse Generator (SNI2 to 0) . Meanwhile, the OPT5 to 0 output
signal can be hardware terminated by DTTI input (DTTI1) in case of emergency. The OPT5 to 0 output signals
are synchronized with the PPG signal in order to eliminate the unwanted glitch.
The Multi-pulse generator has the following features :
Output Signal Control
- 12 output data buffer registers are provided
- Output data register can be updated by any one of output data buffer registers when :
1. an effective edge detected at SNI2 - SNI0 pin
2. 16-bit reload timer underflow
3. output data buffer register OPDBR0 is written
Output data register (OPDR) determines which OPT terminals (OPT5 - 0) output the 16-bit PPG waveform
- Waveform sequencer is provided with a 16-bit timer to measure the speed of motor
- The 16-bit timer can be used to disable the OPT output when the position detection is missing
Input Position Detect Control
- SNI2 - SNI0 input can be used to detect the rotor position
- A controllable noise filter is provided to the SNI2 - SNI0 input
PPG Synchronization for Output signal
- OPT output is able to synchronize the edge of PPG waveform to avoid a short pulse (or glitch) appearance
Vaious interrupt generation causes
EI2OS supported
(1) 16-bit PPG timer (x 1, not present in MB90465 series)
The 16-bit PPG timer 1 is used to provide a PPG signal for waveform sequencer.
(2) 16-bit reload timer (x 1)
The 16-bit reload timer 0 is used to provide signal to waveform sequencer.
(3) Waveform sequencer (not present in MB90465 series)
By using the waveform sequencer, 16-bit PPG timer output signal can be directed to Multi-pulse generator output
(OPT5 ~ OPT0) according to the input signal of Multi-pulse generator (SNI2 ~ SNI0). Meanwhile, the OPT5 ~
OPT0 outputsignal can be hardware terminated by DTTI input (DTTI1) in case of emergency. The OPT5 ~ OPT0
output signalsare synchronized with the PPG signal in order to eliminate the unwanted glitch.
相關PDF資料
PDF描述
MB90F462PMC 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP64
MB90487BPF 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP100
MB90483CPF 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP100
MB90483CPFV 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP100
MB90F489BPFV 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
MB90F474HPF-GE1 制造商:FUJITSU 功能描述:IC 16BIT MCU I2C SMD QFP100
MB90F474HPFR-GE1 制造商:FUJITSU 功能描述:
MB90F474HPMC-GE1 制造商:FUJITSU 功能描述:
MB90F474LPFR-GE1 制造商:FUJITSU 功能描述:
MB90F474LPMCR-GE1 制造商:FUJITSU 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*